(c) "exporter" means a person, located in a Party, who, in accordance with the requirements laid down in the laws and regulations of that Party, exports or produces the originating product and makes out a statement on origin;
(d) "importer" means a person who imports the originating product and claims preferential tariff treatment for it;
(e) "material" means any substance used in the production of a product, including any components, ingredients, raw materials, or parts;
(f) "non-originating material" means a material which does not qualify as originating under this Chapter, including a material whose originating status cannot be determined;
(g) "product" means the product resulting from the production, even if it is intended for use as a material in the production of another product;
(h) "production" means any kind of working or processing including assembly.
Article 39. General Requirements
1. For the purposes of applying the preferential tariff treatment by a Party to the originating good of the other Party in accordance with this Agreement, provided that the products satisfy all other applicable requirements of this Chapter, the following products shall be considered as originating in the other Party
(a) products wholly obtained in that Party within the meaning of Article 41;
(b) products produced in that Party exclusively from originating materials in that Party; and
(c) products produced in that Party incorporating non-originating materials provided they satisfy the requirements set out in Annex 3,
2. If a product has acquired originating status, the non-originating materials used in the production of that product shall not be considered as non-originating when that product is incorporated as a material in another product.
3. The acquisition of originating status shall be fulfilled without interruption in the United Kingdom or the Union.
Article 40. Cumulation of Origin
1. A product originating in a Party shall be considered as originating in the other Party if that product is used as a material in the production of another product in that other Party.
2. Production carried out in a Party on a non-originating material may be taken into account for the purpose of determining whether a product is originating in the other Party.
3. Paragraphs 1 and 2 do not apply if the production carried out in the other Party does not go beyond the operations referred to in Article 43.
4. In order for an exporter to complete the statement on origin referred to in point (a) of Article 54(2) for a product referred to in paragraph 2 of this Article, the exporter shall obtain from its supplier a supplier's declaration as provided for in Annex 6 or an equivalent document that contains the same information describing the non-originating materials concerned in sufficient detail to enable them to be identified.
Article 41. Wholly Obtained Products
1. The following products shall be considered as wholly obtained in a Party:
(a) mineral products extracted or taken from its soil or from its seabed;
(b) plants and vegetable products grown or harvested there;
(c) live animals born and raised there;
(d) products obtained from live animals raised there;
(e) products obtained from slaughtered animals born and raised there;
(f) products obtained by hunting or fishing conducted there;
(g) products obtained from aquaculture there if aquatic organisms, including fish, molluscs, crustaceans, other aquatic invertebrates and aquatic plants are born or raised from seed stock such as eggs, roes, fry, fingerlings, larvae, parr, smolts or other immature fish at a post-larval stage by intervention in the rearing or growth processes to enhance production such as regular stocking, feeding or protection from predators;
(h) products of sea fishing and other products taken from the sea outside any territorial sea by a vessel of a Party;
()) products made aboard of a factory ship of a Party exclusively from products referred to in point (h);
(j) products extracted from the seabed or subsoil outside any territorial sea provided that they have rights to exploit or work such seabed or subsoil;
(k) waste and scrap resulting from production operations conducted there;
(l) waste and scrap derived from used products collected there, provided that those products are fit only for the recovery of raw materials;
(m) products produced there exclusively from the products specified in points (a) to (1).
2. The terms "vessel of a Party" and "factory ship of a Party" in points (h) and (i) of paragraph 1 mean a vessel and factory ship which:
(a) is registered in a Member State or in the United Kingdom;
(b) sails under the flag of a Member State or of the United Kingdom; and
(c) meets one of the following conditions:
G) it is at least 50 % owned by nationals of a Member State or of the United Kingdom; or
Gi) it is owned by legal persons which each:
(A) have their head office and main place of business in the Union or the United Kingdom; and
(B) are at least 50 % owned by public entities, nationals or legal persons of a Member State or the United Kingdom.
Article 42. Tolerances
1. If a product does not satisfy the requirements set out in Annex 3 due to the use of a non-originating material in its production, that product shall nevertheless be considered as originating in a Party, provided that:
(a) the total weight of non-originating materials used in the production of products classified under Chapters 2 and 4 to 24 of the Harmonised System, other than processed fishery products classified under Chapter 16, does not exceed 15 % of the weight of the product;
(b) the total value of non-originating materials for all other products, except for products classified under Chapters 50 to 63 of the Harmonised System, does not exceed 10 % of the ex-works price of the product; or
(c) for a product classified under Chapters 50 to 63 of the Harmonised System, the tolerances set out in Notes 7 and 8 of Annex 2 apply.
2. Paragraph 1 does not apply if the value or weight of non-originating materials used in the production of a product exceeds any of the percentages for the maximum value or weight of non-originating materials as specified in the requirements set out in Annex 3.
3. Paragraph 1 of this Article does not apply to products wholly obtained in a Party within the meaning of Article 41. If Annex 3 requires that the materials used in the production of a product are wholly obtained, paragraphs 1 and 2 of this Article apply.
Article 43. Insufficient Production
1. Notwithstanding point (c) of Article 39(1), a product shall not be considered as originating in a Party if the production of the product in a Party consists only of one or more of the following operations conducted on non-originating materials:
(a) preserving operations such as drying, freezing, keeping in brine and other similar operations where their sole purpose is to ensure that the products remain in good condition during transport and storage; (1)
(b) breaking-up or assembly of packages;
(c) washing, cleaning; removal of dust, oxide, oil, paint or other coverings;
(d) ironing or pressing of textiles and textile articles;
(e) simple painting and polishing operations;
(f) husking and partial or total milling of rice; polishing and glazing of cereals and rice; bleaching of rice;
(g) operations to colour or flavour sugar or form sugar lumps; partial or total milling of sugar in solid form;
(h) peeling, stoning and shelling, of fruits, nuts and vegetables;
(i) sharpening, simple grinding or simple cutting;
(j) sifting, screening, sorting, classifying, grading, matching including the making-up of sets of articles;
(k) simple placing in bottles, cans, flasks, bags, cases, boxes, fixing on cards or boards and all other simple packaging operations;
(l) affixing or printing marks, labels, logos and other like distinguishing signs on products or their packaging;
(m) simple mixing of products, whether or not of different kinds; mixing of sugar with any material;
(n) simple addition of water or dilution with water or another substance that does not materially alter the characteristics of the product, or dehydration or denaturation of products;
(o) simple assembly of parts of articles to constitute a complete article or disassembly of products into parts;
(p) slaughter of animals.
2. For the purposes of paragraph 1, operations shall be considered simple if neither special skills nor machines, apparatus or equipment especially produced or installed are needed for carrying out those operations.
Article 44. Unit of Qualification
1. For the purposes of this Chapter, the unit of qualification shall be the particular product which is considered as the basic unit when classifying the product under the Harmonised System.
2. For a consignment consisting of a number of identical products classified under the same heading of the Harmonised System, each individual product shall be taken into account when applying the provisions of this Chapter.
Article 45. Packing Materials and Containers for Shipment
Packing materials and containers for shipment that are used to protect a product during transportation shall be disregarded in determining whether a product is originating.
Article 46. Packaging Materials and Containers for Retail Sale
Packaging materials and containers in which the product is packaged for retail sale, if classified with the product, shall be disregarded in determining the origin of the product, except for the purposes of calculating the value of non-originating materials if the product is subject to a maximum value of non-originating materials in accordance with Annex 3.
Article 47. Accessories, Spare Parts and Tools
1. Accessories, spare parts, tools and instructional or other information materials shall be regarded as one product with the piece of equipment, machine, apparatus or vehicle in question if they:
(a) are classified and delivered with, but not invoiced separately from, the product; and
(b) are of the types, quantities and value which are customary for that product.
2, Accessories, spare parts, tools and instructional or other information materials referred to paragraph 1 shall be disregarded in determining the origin of the product except for the purposes of calculating the value of non-originating materials if a product is subject to a maximum value of non-originating materials as set out in Annex 3.
Article 48. Sets
Sets, as defined in General Rule 3 for the Interpretation of the Harmonised System, shall be considered as originating in a Party if all of their components are originating. If a set is composed of originating and non-originating components, the set as a whole shall be considered as originating in a Party if the value of the non-originating components does not exceed 15% of the ex-works price of the set.
Article 49. Neutral Elements
In order to determine whether a product is originating in a Party, it shall not be necessary to determine the origin of the following elements, which might be used in its production:
(a) fuel, energy, catalysts and solvents;
(b) plant, equipment, spare parts and materials used in the maintenance of equipment and buildings;
(c) machines, tools, dies and moulds;
(d) lubricants, greases, compounding materials and other materials used in production or used to operate equipment and buildings;
(e) gloves, glasses, footwear, clothing, safety equipment and supplies;
(f) equipment, devices and supplies used for testing or inspecting the product; and
(g) other materials used in the production which are not incorporated into the product nor intended to be incorporated into the final composition of the product.
Article 50. Accounting Segregation
1. Originating and non-originating fungible materials or fungible products shall be physically segregated during storage in order to maintain their originating and non-originating status,
2. For the purpose of paragraph 1, "fungible materials" or "fungible products" means materials or products that are of the same kind and commercial quality, with the same technical and physical characteristics, and that cannot be distinguished from one another for origin purposes.
3. Notwithstanding paragraph 1, originating and non-originating fungible materials may be used in the production of a product without being physically segregated during storage if an accounting segregation method is used.
4. Notwithstanding paragraph 1, originating and non-originating fungible products classified under Chapters 10, 15, 27, 28, 29, headings 32.01 to 32.07, or headings 39.01 to 39.14 of the Harmonised System may be stored in a Party before exportation to the other Party without being physically segregated, provided that an accounting segregation method is used.
5. The accounting segregation method referred to in paragraphs 3 and 4 shall be applied in conformity with a stock management method under accounting principles which are generally accepted in the Party.
6. The accounting segregation method shall be any method that ensures that at any time no more materials or products receive originating status than would be the case if the materials or products had been physically segregated.
7. A Party may require, under conditions set out in its laws or regulations, that the use of an accounting segregation method is subject to prior authorisation by the customs authorities of that Party. The customs authorities of the Party shall monitor the use of such authorisations and may withdraw an authorisation if the holder makes improper use of the accounting segregation method or fails to fulfil any of the other conditions laid down in this Chapter.
Article 51. Returned Products
If a product originating in a Party exported from that Party to a third country returns to that Party, it shall be considered as a non-originating product unless it can be demonstrated to the satisfaction of the customs authority of that Party that the returning product:
(a) is the same as that exported; and
(b) has not undergone any operation other than what was necessary to preserve it in good condition while in that third country or while being exported.
Article 52. Non-alteration
1. An originating product declared for home use in the importing Party shall not, after exportation and prior to being declared for home use, have been altered, transformed in any way or subjected to operations other than to preserve it in good condition or than adding or affixing marks, labels, seals or any other documentation to ensure compliance with specific domestic requirements of the importing Party.
2. The storage or exhibition of a product may take place in a third country, provided that the product remains under customs supervision in that third country.
3. The splitting of consignments may take place in a third country if it is carried out by the exporter or under the responsibility of the exporter, provided that the consignments remain under customs supervision in that third country.
4. In the case of doubt as to whether the requirements provided for in paragraphs 1 to 3 are complied with, the customs authority of the importing Party may request the importer to provide evidence of compliance with those requirements, which may be given by any means, including contractual transport documents such as bills of lading or factual or concrete evidence based on the marking or numbering of packages or any evidence related to the product itself.
Article 53. Review of Drawback of, or Exemption from, Customs Duties
Not earlier than two years from the entry into force of this Agreement, at the request of either Party, the Trade Specialised Committee on Customs Cooperation and Rules of Origin shall review the Parties' respective duty drawback and inward-processing schemes. For that purpose, at the request of a Party, no later than 60 days from that request, the other Party shall provide the requesting Party with available information and detailed statistics covering the period from the entry into force of this Agreement, or the previous five years if that period is shorter, on the operation of its duty- drawback and inward-processing scheme. In the light of this review, the Trade Specialised Committee on Customs Cooperation and Rules of Origin may make recommendations to the Partnership Council for the amendment of the provisions of this Chapter and its Annexes, with a view to introducing limitations or restrictions with respect to drawback of or exemption from customs duties.
Section 2. ORIGIN PROCEDURES
Article 54. Claim for Preferential Tariff Treatment
1. The importing Party, on importation, shall grant preferential tariff treatment to a product originating in the other Party within the meaning of this Chapter on the basis of a claim by the importer for preferential tariff treatment. The importer shall be responsible for the correctness of the claim for preferential tariff treatment and for compliance with the requirements provided for in this Chapter.
2. A claim for preferential tariff treatment shall be based on:
(a) astatement on origin that the product is originating made out by the exporter; or
(b) the importer's knowledge that the product is originating.
3. The importer making the claim for preferential tariff treatment based on a statement on origin as referred to in point (a) of paragraph 2 shall keep the statement on origin and, when required by the customs authority of the importing Party, shall provide a copy thereof to that customs authority.
Article 55. Time of the Claim for Preferential Tariff Treatment
1. A claim for preferential tariff treatment and the basis for that claim as referred to in Article 54(2) shall be included in the customs import declaration in accordance with the laws and regulations of the importing Party.
2. By way of derogation from paragraph 1 of this Article, if the importer did not make a claim for preferential tariff treatment at the time of importation, the importing Party shall grant preferential tariff treatment and repay or remit any excess customs duty paid provided that:
(a) the claim for preferential tariff treatment is made no later than three years after the date of importation, or such longer time period as specified in the laws and regulations of the importing Party;
(b) the importer provides the basis for the claim as referred to in Article 54(2); and
(c) the product would have been considered originating and would have satisfied all other applicable requirements within the meaning of Section 1 of this Chapter if it had been claimed by the importer at the time of importation.
The other obligations applicable to the importer under Article 54 remain unchanged.
Article 56. Statement on Origin
1. A statement on origin shall be made out by an exporter of a product on the basis of information demonstrating that the product is originating, including, information on the originating status of materials used in the production of the product. The exporter shall be responsible for the correctness of the statement on origin and the information provided.
2. A statement on origin shall be made out using one of the language versions set out in Annex 7 in an invoice or on any other document that describes the originating product in sufficient detail to enable the identification of that product. The exporter shall be responsible for providing sufficient detail to allow the identification of the originating product. The importing Party shall not require the importer to submit a translation of the statement on origin.
3. A statement on origin shall be valid for 12 months from the date it was made out or for such longer period as provided by the Party of import up to a maximum of 24 months.
4. A statement on origin may apply to:
(a) a single shipment of one or more products imported into a Party; or
(b) multiple shipments of identical products imported into a Party within the period specified in the statement on origin, which shall not exceed 12 months.
5. If, at the request of the importer, unassembled or disassembled products within the meaning of General Rule 2(a) for the Interpretation of the Harmonised System that fall within Sections XV to XX] of the Harmonised System are imported by instalments, a single statement on origin for such products may be used in accordance with the requirements laid down by the customs authority of the importing Party.
Article 57. Discrepancies
The customs authority of the importing Party shall not reject a claim for preferential tariff treatment due to minor errors or discrepancies in the statement on origin, or for the sole reason that an invoice was issued in a third country.
Article 58. Importer's Knowledge
1. For the purposes of a claim for preferential tariff treatment that is made under point (b) of Article 54(2), the importer's knowledge that a product is originating in the exporting Party shall be based on information demonstrating that the product is originating and satisfies the requirements provided for in this Chapter.
2. Before claiming the preferential treatment, in the event that an importer is unable to obtain the information referred to in paragraph 1 of this Article as a result of the exporter deeming that information to be confidential information or for any other reason, the exporter may provide a statement on origin so that the importer may claim the preferential tariff treatment on the basis of point (a) of Article 54(2).
Article 59. Record-keeping Requirements
1. For a minimum of three years after the date of importation of the product, an importer making a claim for preferential tariff treatment for a product imported into the importing Party shall keep:
(a) if the claim was based on a statement on origin, the statement on origin made out by the exporter; or
(b) if the claim was based on the importer's knowledge, all records demonstrating that the product satisfies the requirements for obtaining originating status.
2. An exporter who has made out a statement on origin shall, for a minimum of four years after that statement on origin was made out, keep a copy of the statement on origin and all other records demonstrating that the product satisfies the requirements to obtain originating status.
3. The records to be kept in accordance with this Article may be held in electronic format.
Article 60. Small Consignments
1. By way of derogation from Articles 54 to 58, provided that the product has been declared as meeting the requirements of this Chapter and the customs authority of the importing Party has no doubts as to the veracity of that declaration, the importing Party shall grant preferential tariff treatment to:
(a) a product sent in a small package from private persons to private persons;
(b) a product forming part of a traveller's personal luggage; and
(c) for the United Kingdom, in addition to points (a) and (b) of this Article, other low value consignments.
2. The following products are excluded from the application of paragraph 1 of this Article:
(a) products, the importation of which forms part of a series of importations that may reasonably be considered to have been made separately for the purpose of avoiding the requirements of Article 54;