Mercosur - Singapore FTA (2023)
Previous page Next page

1. Originating products, for which preferential tariff treatment is requested in a Party, shall be the same products as exported from another Party. They must not be altered or transformed in any way nor undergo operations other than those to preserve their condition, or to add or affix marks, labels, seals or any documentation to ensure compliance with domestic requirements of the importing Party, prior to being declared for preferential tariff treatment.

2. Products mentioned in paragraph 1 shall be transported directly between Singapore and MERCOSUR. The products may undergo transit, storage, splitting of consignments, repacking, as well as the operations mentioned in paragraph 1 in a non-party and shall retain their originating status, provided they remain under customs control in that non-party.

3. Paragraphs 1 and 2 shall be considered fulfilled, unless the customs authority of the importing Party has reason to believe the contrary. In such case, the customs authority of the importing Party may request the importer or his/her representative to provide appropriate evidence of compliance, which may be given by any means, including contractual transport documents such as bills of lading or factual or concrete evidence based on marking or numbering of packages or any other evidence.

Article 3.15. Exhibitions

1. Originating products, sent for exhibition outside the Parties and sold after the exhibition for importation in a Party, shall benefit on importation from the provisions of this Agreement provided it is shown to the satisfaction of the customs authorities of the importing country that:

(a) an exporter has consigned these products from a Party to the country in which the exhibition is held and has exhibited them there;

(b) the products have been sold or otherwise disposed of by that exporter to a person in a Party;

(c) the products have been consigned during the exhibition or immediately thereafter in the state in which they were sent for exhibition; and

(d) the products have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition.

2. A proof of origin must be submitted to the customs authorities of the importing country in the normal manner. The name and address of the exhibition must be indicated thereon.

3. Paragraph 1 shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organised for private purposes in shops or business premises with a view to the sale of foreign products, and during which the products remain under customs control.

Section D. PROOF OF ORIGIN

Article 3.16. Proof of Origin

1. Products originating in a Party, on importation into another Party, shall benefit from preferential treatment under this Agreement upon submission of a proof of origin.

2. Either of the following shall be considered as a proof of origin:

(a)    an origin declaration by an exporter or producer, in accordance with Article 3.17 (Origin declaration) [2][3] ; or

(b) a certificate of origin by an issuing body in accordance with Article 3.18 (Procedure for the issuance of a certificate of origin).

3. A proof of origin shall:

(a) specify that the good is originating and meets the requirements of this Chapter;

(b) be in writing, or any electronic format as notified by an importing Party; and

(c) be in the English language.

4. Each Party shall provide that a proof of origin remains valid for one year from the date on which it is issued or completed. Preferential treatment shall be claimed within such period to the customs authorities of the importing Party.

5. A proof of origin may be issued or completed when the products to which it relates are exported, or after exportation.

[2] Products originating in Singapore shall, on importation into a MERCOSUR State, benefit from preferential treatment under this Agreement upon submission of an origin declaration completed by an exporter or producer established in a Party, in accordance with Article 17 (Origin declaration).
[3] For exporters based in MERCOSUR, the application of paragraph 2(a) shall apply after MERCOSUR has notified to Singapore that such legislation applies to the exporters in the MERCOSUR State where the exporter completing the Origin declaration is based.

Article 3.17. Origin Declaration

1. An Origin declaration can be completed by an exporter or producer established in a State Party for products originating in that State Party and otherwise fulfilling the requirements of this Chapter.

2. The origin declaration must be completed on an invoice or any other commercial document that describes the originating product in sufficient detail to enable its identification and that contains a set of minimum data elements as set out in Annex 3-D (Minimum data elements).

3. The exporter or producer making out an origin declaration shall be prepared to submit, at any time, upon the request of the competent authority of the Party of export and, in accordance with Article 3.27 (Verification of origin), upon the request of the competent authority of the Party of import, all appropriate documents proving the originating status of the products concerned as well as the fulfilment of the other requirements of this Chapter.

4. Each Party shall provide that if a producer certifies the origin of a good, the certification of origin is completed on the basis of the producer having information that the good is originating.

5. When the exporter is not the producer of the product, the exporter may complete the origin declaration on the basis of:

(a) its knowledge of whether the product qualifies as an originating product, based on information in the exporter's possession;

(b) its reasonable reliance on the producer's written representation that the product qualifies as an originating product; or

(c) a completed origin declaration for the product, voluntarily provided to the exporter by the producer.

Article 3.18. Procedure for the Issuance of a Certificate of Origin

1. A certificate of origin shall be issued by the competent authorities of the exporting country on application having been made in writing by the exporter or producer. The application form should contain a signed statement by the producer which indicates the characteristics and components of the final product as well as it productive process.

2. For this purpose, the exporter or producer shall fill out both the certificate of origin and the application form. A specimen of the certificate of origin shall appear in Annex 3-C (Certificate of origin). If the certificate of origin is hand-written, it shall be completed in ink, in printed characters. The description of the products must be given in the box reserved for this purpose without leaving any blank lines. Where the box is not completely filled, a horizontal line must be drawn below the last line of the description, the empty space being crossed through.

3. Notwithstanding paragraph 1, the competent authorities may authorize a government office or a certifying office or institution to issue the certificate of origin, in accordance with the provisions of this Article.

4. A certificate of origin shall be issued by the competent authorities of a Signatory MERCOSUR State if the products concerned can be considered as products originating in that State Party and fulfil the other requirements of this Chapter.

5. The exporter or producer applying for the issuance of a certificate of origin shall be prepared to submit, at any time, upon the request of the competent authorities of the Party of export and, in accordance with Article 3.27 (Verification of origin), upon the request of the competent authority of the Party of import, all appropriate documents proving the originating status of the products concerned as well as the fulfilment of the other requirements of this Chapter.

6. The issuing competent authorities shall also ensure that the forms referred to in paragraph 2 are duly completed. In particular, they shall check whether the space reserved for the description of the products has been completed in such a manner as to exclude all possibility of fraudulent additions.

7. The competent authorities of the exporting country issuing a certificate of origin shall keep for at least 3 (three) years the application form referred to in paragraph 2.

Article 3.19. Issuance of a Duplicate Certificate of Origin

1. In the event of theft, loss or destruction of a certificate of origin, the exporter may apply to the competent authorities which issued it for a duplicate made out on the basis of the export documents in their possession.

2. The duplicate issued in this way must be endorsed with the following word: "DUPLICATE".

3. The endorsement referred to in paragraph 2, the number and date of the original certificate of origin shall be inserted in the "Remarks" box of the duplicate certificate of origin.

Article 3.20. Issuance of a Proof of Origin on the Basis of a Proof of Origin Issued Previously

1. If originating products for which a proof of origin has been submitted are stored in a warehouse or a free zone under customs control in a State Party, it could be possible for the customs or competent authority to issue one or more proofs of origin, based on the original proof of origin, for the purpose of sending all or some of these products elsewhere to another State Party.

2. In the case of MERCOSUR, the provisions of paragraph 1 shall apply only to the State Parties that have decided on its implementation and that have duly notified the Joint Committee thereof.

Article 3.21. Supporting Documents

The documents referred to in Article 3.17 (3) (Origin declaration) and Article 3.18 (5) (Procedure for the issuance of the certificate of origin), in paper or electronic form, used for the purpose of

proving that products covered by a proof of origin can be considered as products originating in a Party and fulfill the other requirements of this Chapter, may consist inter alia of the following:

(a) direct evidence of the processes carried out by the exporter or supplier to obtain the goods concerned, contained for example in his accounts or internal book-keeping;

(b) documents proving the originating status of materials used, issued or made out in a Party where these documents are used in accordance with domestic legislation;

(c) documents proving the working or processing of materials in a Party, issued or made out in a Party, where these documents are used in accordance with domestic legislation; and

(d) proof of origin proving the originating status of materials used, issued or made out in a Party in accordance with this Chapter.

Section E. PREFERENTIAL TREATMENT

Article 3.22. Importation Requirements

1. Each Party shall grant preferential tariff treatment in accordance with this Agreement to originating products of a Party imported from another Party, on the basis of a proof of origin referred to in Article 3.16 (Proof of origin).

2. Unless otherwise provided for in this Section, each Party shall require an importer in its territory that claims preferential tariff treatment for a product imported into its territory from the territory of another Party to:

(a) make a written statement that the product qualifies as an originating product and this written statement shall form part of the import document and be based on valid proof of origin;

(b) have the proof of origin in its possession at the time the written statement referred to in subparagraph (a) is made;

(c) provide, on request of that Party's customs administration, the proof of origin and, if required by that customs administration, such other documentation relating to the importation of the product in accordance with the domestic law of the importing Party; and

(d) promptly make a corrected statement and pay any duties owing when the importer has reason to believe that the proof of origin on which a written statement was based contains information that is not correct.

3. Where, at the time of importation, the customs authority of the importing Party has a reasonable doubt on the origin of a product, the product may be released upon a deposit or the payment of duties, pending the outcome of the verification. The deposit or duties paid shall be refunded once the outcome of the verification confirms that the product complies with the requirements under this Chapter.

Article 3.23. Importation by Instalments

Where, at the request of an importer and on conditions laid down by the customs authority of the importing Party, a dismantled or non-assembled product within the meaning of Rule 2(a) of the General Rules for the Interpretation of the Harmonized System is imported by instalments, a proof of origin may be submitted to the customs authority upon importation of the first instalment.

Article 3.24. Obligations Relating to Exportation and Importation

1. An exporter or producer who has provided a proof of origin shall keep a copy of the proof of origin and supporting documents for at least 5 (five) years from the date of completion or issuance, or longer if required by laws and regulations of the State Party of export, including records concerning the purchase of, cost of, value of, shipping of and payment for, the exported product.

2. For the same period mentioned in paragraph 1, the producer who has provided a proof of origin shall also keep a copy of records concerning:

(a) the purchase of, cost of, value of, and payment for all materials, including indirect materials, used in the production of the exported product; and

(b) the production of the product in the form in which it was exported.

3. When becoming aware of or having reason to believe that a proof of origin contains incorrect information, the exporter or producer who has provided the proof of origin shall immediately notify the importer and the customs authority or competent governmental authorities of the exporting State Party of any change affecting the originating status of each product covered by that proof of origin.

4. An importer who has been granted preferential tariff treatment shall keep the proof of origin and other relevant documents for at least 3 (three) years from the date on which preferential treatment was granted, or longer if required by the laws and regulations of the State Party of import.

5. When becoming aware of or having reason to believe that a proof of origin contains incorrect information, an importer who has been granted preferential tariff treatment shall immediately notify the customs authority of the importing State Party of any change affecting the originating status of each product covered by that proof of origin.

6. When an importer claims preferential tariff treatment for a product imported from the territory of another State Party, the importing State Party may deny preferential tariff treatment to the product if the importer, exporter or producer fails to comply with any requirement under this Chapter.

Article 3.25. Discrepancies and Formal Errors

1. The discovery of slight discrepancies between the statements made in the proof of origin and those made in the documents submitted to the customs administration for the purpose of carrying out the formalities for importing the products shall not because of that fact render the proof of origin null and void if it is established that this document corresponds to the products submitted.

2. Obvious formal errors such as typing errors on a proof of origin shall not cause this document to be rejected if these errors do not create doubts concerning the correctness of the statements made in the document.

3. Each State Party shall provide that if the customs administration of the State Party into whose territory a product is imported determines that a proof of origin is illegible, defective on its face, or has not been completed in accordance with this Chapter, the importer shall be granted a period of 30 (thirty) days from the date of receipt of the notification sent by the customs administration to provide the corrected proof of origin.

Article 3.26. Third Party Invoice

A State Party shall not reject a claim for preferential tariff treatment for the sole reason that the invoice was issued in a non-Party.

Section F. ORIGIN VERIFICATION AND OTHER MATTERS

Article 3.27. Verification of Origin

1. For the purposes of determining whether a product imported into its territory qualifies as an originating product, the importing State Party may, through its competent authority, conduct a verification of any claim for preferential tariff treatment by means of:

(a) a written request or questionnaire seeking information, including records, from the exporter or producer of the product in the territory of another State Party, limited to information to determine whether the product is originating;

(b) a visit to the premises of an exporter or producer in the territory of another State Party to observe the facilities used in the production of the product, and review the records referred to in Article 3.24 (1) and (2) (Obligations relating to exportation and importation) limited to records on whether the product is originating; or

(c) any other procedures as may be mutually decided by the State Parties.

2. Each State Party shall provide that verifications of origin concerning whether a product is originating or whether all other requirements of this Chapter are fulfilled shall be:

(a) based on risk assessment methods applied by the competent authority of the importing State Party, which may include random selection; or

(b) made when the importing State Party has reasonable doubts about whether the product is originating or whether all other requirements of this Chapter have been fulfilled.

3. If an importing State Party makes a verification request pursuant to paragraph 1, it shall inform the competent authorities of the exporting State Party at the time of its verification request to the exporter or producer. In addition, on request of the importing State Party, the State Party where the exporter or producer is located may, as it deems appropriate and in accordance with its laws and regulations, assist with the verification. This assistance may include providing a contact point for the verification, collecting information from the exporter or producer on behalf of the importing State Party, or other activities in order that the importing State Party may make a determination as to whether the good is originating. The importing State Party shall not deny a claim for preferential tariff treatment solely on the ground that the State Party where the exporter or producer is located did not provide requested assistance. If an importing State Party initiates a verification pursuant to subparagraph (b) of paragraph 1, it shall, at the time of the request for the visit, inform the State Party where the exporter or producer is located and provide the opportunity for the officials of the State Party where the exporter or producer is located to accompany them during the visit.

4. If an importing State Party has initiated a verification pursuant to paragraph 1, it shall inform the importer of the initiation of the verification.

5. For the purposes of verifying the origin of a product, the importing State Party may request the importer of the product to voluntarily obtain and supply information voluntarily provided by the exporter or producer of the product in the territory of another State Party, provided that the importing State Party shall not consider the failure or refusal of the importer to obtain and supply such information as a failure of the exporter or producer to supply the information or as a ground for denying preferential tariff treatment. If the importer does not provide information to the importing State Party or the information provided is not sufficient to support a claim for preferential tariff treatment, the importing State Party shall request information from the exporter or producer pursuant to subparagraph (a) or (b) of paragraph 1 before it may deny the claim for preferential tariff treatment.

6. If an importing State Party conducts a verification pursuant to this Article, it shall accept information, including records or documents, directly from the competent authority of the exporting party, exporter, producer, or importer.

7. A written request for information or for a verification pursuant to subparagraph (a) or (b) of paragraph 1 shall:

(a) be in English or in an official language of the State Party of the person to whom the request is made;

(b) include the identity of the government authority issuing the request;

(c) state the reason for the request, including the specific issue the requesting State Party seeks to resolve with the verification;

(d) include sufficient information to identify the good that is being verified; and

(e) include a copy of relevant information submitted with the good, including the certification of origin.

8. Each State Party shall allow an exporter or producer who receives a written request or questionnaire pursuant to subparagraph (a) of paragraph 1 not less than 30 (thirty) days from the date of receipt of such request or questionnaire to provide the information and documentation required or the completed questionnaire. On written request by the exporter or producer made during that period, the importing State Party shall grant the exporter or producer a single extension of the deadline for a period of 30 (thirty) days.

9. If an exporter or producer fails to provide the information and documentation required by a written request or questionnaire or fails to return a duly completed questionnaire within the period or extension set out in paragraph 8, an importing State Party may deny preferential tariff treatment to the product in question in accordance with the procedures set out in paragraphs 18 to 21.

10. Prior to conducting a verification visit pursuant to subparagraph (b) of paragraph 1, a State Party shall, through its competent authority:

(a) deliver a written notification of its intention to conduct the visit:

(i) to the exporter or producer whose premises are to be visited;

(ii) to the competent authority of the State Party in whose territory the visit is to occur; and

(b) obtain the written consent of the exporter or producer whose premises are to be visited.

11. The notification referred to in paragraph 10 shall include:

(a) the name of the entity issuing the notification;

(b) the name of the exporter or producer whose premises are to be visited;

(c) the date and place of the proposed verification visit;

(d) the scope of the proposed verification visit, including specific reference to the product that is the subject of the verification;

(e) the names and titles of the officials performing the verification visit; and

(f) the legal authority for the verification visit.

12. When, within 30 (thirty) days of receipt of a notification pursuant to paragraph 10, an exporter or producer has not given its written consent to a proposed verification visit, the notifying State Party may deny preferential tariff treatment to the product that would have been the subject of the visit.

13. Each State Party shall allow, when the exporter or producer receives notification pursuant to subparagraph (a)(i) of paragraph 10, the exporter or producer to, on a single occasion, within 15 (fifteen) days of receipt of the notification, request the postponement of the proposed verification visit for a period not exceeding 60 (sixty) days from the date of such receipt or for such longer period as agreed to by the notifying State Party.

14. The State Party whose competent authority receives notification pursuant to subparagraph (a)(ii) of paragraph 10, may, within 15 (fifteen) days of receipt of the notification, postpone the proposed verification visit for a period not exceeding 60 (sixty) days from the date of such receipt or for such longer period as the State Parties may decide.

15. A State Party shall not deny preferential tariff treatment to a product based solely on the postponement of a verification visit pursuant to paragraphs 13 or 14.

16. A State Party shall permit an exporter or a producer whose product is the subject of a verification visit by another State Party to designate two observers to be present during the visit, provided that:

(a) the observers shall only participate as such; and

(b) the failure of the exporter or producer to designate observers shall not result in the postponement of the visit.

17. When a State Party conducts a verification of origin involving a value test, de minimis calculation or any other provision in this Chapter to which Generally Accepted Accounting Principles may be relevant, it shall apply such principles as are applicable in the territory of the State Party in which the verification is taking place.

18. The State Party conducting a verification shall make a determination following a verification as expeditiously as possible and no later than 90 (ninety) days after it receives the information necessary to make the determination, including, if applicable, any information received pursuant to paragraph 21, and no later than 365 days after the first request for information or other action pursuant to paragraph 1. If permitted by its laws and regulations, a State Party may extend the 365 days period in exceptional cases, such as where the technical information concerned is very complex.

19. The State Party conducting a verification shall provide the exporter or producer whose product is the subject of the verification with a written determination of whether the product qualifies as an originating product, including findings of fact and the legal basis for the determination. The importing State Party shall also provide a written determination to the importer and to the competent authorities of the exporting State Party.

20. When a State Party determines as a result of an origin verification that the product that is the subject of the verification does not qualify as an originating product, the State Party shall include in its written determination pursuant to paragraph 18 a written notice of intent to deny preferential tariff treatment of the product.

21. A written notice of intent pursuant to paragraph 20 shall provide for a period of not less than 30 (thirty) days during which the exporter or producer of the product may provide, with regard to that determination, written comments or additional information that will be taken into consideration by the State Party prior to completing the verification.

22. For the purposes of this Article, the importing State Party shall ensure that all communication to the exporter or producer and to the State Party of export be sent by any means whereby a confirmation of receipt can be proven. The periods referred to in this Article will begin from the date of such receipt.

23. When the verification carried out by a State Party shows that an exporter or producer repeatedly makes false or unsupported representations that a product imported into the State Party's territory qualifies as an originating product, the State Party may suspend the preferential tariff treatment to be accorded to subsequent shipment of identical product according to the Customs Valuation Agreement exported or produced by such a person until that person establishes that the shipment complies with this Chapter, in accordance with its domestic laws, regulations or practices.

Article 3.28. Cooperation between Customs Authorities and other Competent Governmental Authorities

1. The customs authorities or competent governmental authorities of the Signatory MERCOSUR States shall provide to the customs authorities of Singapore, by communication through the MERCOSUR Secretariat, specimens of stamps4 used for the issue of certificates of origin and the addresses of the customs or competent governmental authorities responsible for verifying origin declarations.

2. Where the competent governmental authority of an exporting State Party designates other entities or bodies to carry out the issuance of certificate of origin, the exporting State Party shall notify in writing the other Parties of its designees.

3. For the purposes of Article 3.16 (Proof of origin), Singapore and, on the other side, one or more Signatory MERCOSUR States, may agree to establish systems that allow proofs of origin listed in subparagraphs (a) and (b) of paragraph 1 to be issued electronically or submitted electronically.

4. The Parties shall endeavour to resolve technical matters related to the implementation or application of this Chapter, to the extent possible, through direct consultations between the customs authority or competent governmental authorities or in the Sub-committee on Trade in Goods and Rules of Origin.

4 For greater certainty, the customs authorities or competent governmental authorities of the Signatory MERCOSUR States shall provide the customs authorities of Singapore information on the stamp specimens by providing the customs authorities of Singapore access to the ALADI database.

Article 3.29. Confidentiality

1. Each Party shall maintain, in accordance with its legislation, the confidentiality of the information collected under this Chapter and shall protect that information from disclosure that could prejudice the competitive position of a person to whom the information relates.

2. Each Party shall ensure that the information collected under this Chapter is not used for purposes other than the administration or enforcement of determinations of origin and of customs matters, except with the authorisation of the person or State Party who provided the information.

3. Notwithstanding paragraph 2, each Party may use any information collected under this Chapter in any administrative, jurisdictional or judicial proceedings instituted for failure to comply with customs and tax related laws and regulations implementing this Chapter.

Article 3.30. Dispute Settlement

1. Where the Parties raise a question as to the implementation or interpretation of this Chapter, they shall be submitted to the Subcommittee on Trade in Goods and Rules of Origin.

2. Nothing in this Article shall affect the procedures or the rights of the Parties under Chapter 18 (Dispute Settlement).

3. In all cases the settlement of disputes between the importer and the customs or competent governmental authorities of the importing country shall be under the legislation of the said country.

Section G. FINAL PROVISIONS

Article 3.31. Penalties

Appropriate penalties shall be imposed on any person who draws up, or causes to be drawn up, a document which contains incorrect information for the purposes of obtaining preferential treatment for products.

Article 3.32. Products In Transit or Storage

The provisions of this Chapter may be applied to products which, on the date of entry into force of this Agreement, are either in transit or in temporary storage in a customs warehouse or free zone under customs control. For such products, a proof of origin may be completed retrospectively up to six months after the entry into force of this Agreement, provided that the provisions of this Chapter and in particular Article 3.14 (Non-alteration) have been fulfilled.

Article 3.33. Explanatory Notes

The Parties may consider the need for "Explanatory notes" regarding the interpretation, application and administration of this Chapter.

  • Chapter   1 INITIAL PROVISIONS AND GENERAL DEFINITIONS 1
  • Article   1.1 Establishment of a Free Trade Area 1
  • Article   1.2 Objectives 1
  • Article   1.3 Definitions of General Application 1
  • Article   1.4 Trade and Investment Relations Governed by this Agreement 1
  • Chapter   2 NATIONAL TREATMENT AND MARKET ACCESS FOR GOODS 1
  • Article   2.1 Scope 1
  • Article   2.2 Definitions 1
  • Article   2.3 National Treatment 1
  • Article   2.4 Classification of Goods 1
  • Article   2.5 Customs Valuation 1
  • Article   2.6 Elimination of Customs Duties on Imports 1
  • Article   2.7 Goods Re-entered after Repair 1
  • Article   2.8 Commercial Samples 1
  • Article   2.9 Temporary Admission of Goods 1
  • Article   2.10 Quantitative Import and Export Restrictions 1
  • Article   2.11 Export Prohibitions and Restrictions on Foodstuffs 1
  • Article   2.12 Administrative Fees and Formalities 2
  • Article   2.13 Import and Export Licensing 2
  • Article   2.14 Technical Consultations 2
  • Article   2.15 Subcommittee on Trade In Goods and Rules of Origin 2
  • Chapter   3 RULES OF ORIGIN 2
  • Section   A GENERAL PROVISIONS 2
  • Article   3.1 Definitions 2
  • Section   B CONCEPT OF "ORIGINATING PRODUCTS" 2
  • Article   3.2 General Requirements 2
  • Article   3.3 Wholly Obtained Products 2
  • Article   3.4 Sufficient Working or Processing 2
  • Article   3.5 Insufficient Working or Processing 2
  • Article   3.8 Packaging Materials, Packing Materials and Containers 2
  • Article   3.9 Accessories, Spare Parts and Tools 2
  • Article   3.10 Neutral Elements 2
  • Article   3.11 Accounting Segregation 2
  • Article   3.12 Sets 2
  • Section   C TERRITORIAL REQUIREMENTS 2
  • Article   3.13 Principle of Territoriality 2
  • Article   3.14 Non-alteration 3
  • Article   3.15 Exhibitions 3
  • Section   D PROOF OF ORIGIN 3
  • Article   3.16 Proof of Origin 3
  • Article   3.17 Origin Declaration 3
  • Article   3.18 Procedure for the Issuance of a Certificate of Origin 3
  • Article   3.19 Issuance of a Duplicate Certificate of Origin 3
  • Article   3.20 Issuance of a Proof of Origin on the Basis of a Proof of Origin Issued Previously 3
  • Article   3.21 Supporting Documents 3
  • Section   E PREFERENTIAL TREATMENT 3
  • Article   3.22 Importation Requirements 3
  • Article   3.23 Importation by Instalments 3
  • Article   3.24 Obligations Relating to Exportation and Importation 3
  • Article   3.25 Discrepancies and Formal Errors 3
  • Article   3.26 Third Party Invoice 3
  • Section   F ORIGIN VERIFICATION AND OTHER MATTERS 3
  • Article   3.27 Verification of Origin 3
  • Article   3.28 Cooperation between Customs Authorities and other Competent Governmental Authorities 3
  • Article   3.29 Confidentiality 3
  • Article   3.30 Dispute Settlement 3
  • Section   G FINAL PROVISIONS 3
  • Article   3.31 Penalties 3
  • Article   3.32 Products In Transit or Storage 3
  • Article   3.33 Explanatory Notes 3
  • Chapter   4 CUSTOMS PROCEDURES AND TRADE FACILITATION 4
  • Article   4.1 Scope 4
  • Article   4.2 Objectives 4
  • Article   4.3 Transparency 4
  • Article   4.4 Customs Cooperation 4
  • Article   4.5 Advance Rulings 4
  • Article   4.6 Review and Appeal 4
  • Article   4.7 Single Window and Use of Automated System 4
  • Article   4.8 Express Shipments 4
  • Article   4.9 Risk Management 4
  • Article   4.10 Authorised Economic Operator ("AEO") 4
  • Article   4.11 Perishable Goods 4
  • Article   4.12 Release of Goods 4
  • Article   4.13 Temporary Import 4
  • Chapter   5 TRADE REMEDIES 4
  • Section   A GLOBAL SAFEGUARD MEASURES 4
  • Article   5.1 Global Safeguard Measures 4
  • Section   B ANTI-DUMPING AND COUNTERVAILING MEASURES 4
  • Article   5.2 General Provisions 4
  • Article   5.3 Practices Relating to Anti-dumping and Countervailing Duty Proceedings 4
  • Article   5.4 Notifications and Consultations 4
  • Article   5.5 Treatment of Confidential Information 4
  • Article   5.6 Disclosure of the Essential Facts 4
  • Article   5.7 Undertakings 4
  • Article   5.8 Lesser Duty Rule 4
  • Article   5.9 Sunset Reviews 4
  • Article   5.10 Exemption from Investigation after Termination 4
  • Section   C GENERAL PROVISIONS 4
  • Article   5.11 Special Agricultural Safeguards 4
  • Article   5.12 Rules of Origin 4
  • Article   5.13 Non-application of Dispute Settlement 4
  • Chapter   6 BILATERAL SAFEGUARD MEASURES 4
  • Section   A DEFINITIONS 4
  • Article   6.1 4
  • Section   B CONDITIONS FOR THE APPLICATION OF BILATERAL SAFEGUARD MEASURES 5
  • Article   6.2 5
  • Article   6.3 5
  • Article   6.4 5
  • Article   6.5 5
  • Article   6.6 5
  • Article   6.7 5
  • Article   6.8 5
  • Section   C INVESTIGATION AND TRANSPARENCY PROCEDURES 5
  • Article   6.9 5
  • Article   6.10 5
  • Article   6.11 5
  • Article   6.12 5
  • Article   6.13 5
  • Section   D PROVISIONAL BILATERAL SAFEGUARDS 5
  • Article   6.14 5
  • Section   E PUBLIC NOTICE 5
  • Article   6.15 5
  • Article   6.16 5
  • Section   F NOTIFICATIONS AND CONSULTATIONS 5
  • Article   6.17 5
  • Article   6.18 5
  • Chapter   7 SANITARY AND PHYTOSANITARY MEASURES 5
  • Article   7.1 Scope 5
  • Article   7.2 General Provisions 5
  • Article   7.3 Objectives 5
  • Article   7.4 Definitions 5
  • Article   7.5 Adaptation to Regional Conditions, Including Pest- or Disease-free Areas and Areas of Low Pest or Disease Prevalence 5
  • Article   7.6 Equivalence 5
  • Article   7.7 Risk Analysis 6
  • Article   7.8 Audits [2] 6
  • Article   7.9 Import Checks [3] 6
  • Article   7.10 Certification 6
  • Article   7.11 Transparency [5] 6
  • Article   7.12 Emergency Measures 6
  • Article   7.13 Cooperation 6
  • Article   7.14 Information Exchange 6
  • Article   7.15 Technical Consultations 6
  • Article   7.16 Competent Authorities and Contact Points 6
  • Chapter   8 TECHNICAL BARRIERS TO TRADE 6
  • Article   8.1 Objective 6
  • Article   8.2 Scope of Application and Definitions 6
  • Article   8.3 Incorporation of the TBT Agreement 6
  • Article   8.4 Cooperation on Trade Facilitating Initiatives 6
  • Article   8.5 Standards 6
  • Article   8.6 Technical Regulations 7
  • Article   8.7 Conformity Assessment Procedures 7
  • Article   8.8 Marking and Labelling 7
  • Article   8.9 Transparency 7
  • Article   8.10 Technical Cooperation 7
  • Article   8.11 Technical Discussions 7
  • Article   8.12 Contact Points 7
  • Chapter   9 INVESTMENT 7
  • Article   9.1 Definitions 7
  • Article   9.2 Scope and Coverage [3] 7
  • Article   9.3 National Treatment 7
  • Article   9.4 Special Formalities and Information Requirements 7
  • Article   9.5 Access to Justice and Due Process of Law 7
  • Article   9.6 Senior Management and Boards of Directors 7
  • Article   9.7 Schedules of Specific Commitments for Investment and Schedules of Reservations and Non-Conforming Measures for Services and Investment 7
  • Article   9.8 Schedules of Specific Commitments 7
  • Article   9.9 Schedules of Non-Conforming Measures 7
  • Article   9.10 Payments and Transfers 8
  • Article   9.11 Right to Regulate 8
  • Article   9.12 Responsible Business Conduct 8
  • Article   9.13 Subcommittee on Investment 8
  • Article   9.14 Focal Points or Ombudspersons 8
  • Article   9.15 Dispute Prevention and Mediation 8
  • Article   9.16 Annexes 8
  • Article   9.17 Savings Clause 8
  • ANNEX 9-A   ADDITIONAL INVESTMENT PROVISIONS FOR BRAZIL, PARAGUAY, URUGUAY AND SINGAPORE (1) 8
  • Article   9-A.1 Definitions 8
  • Article   9-A.2 Scope and Coverage 8
  • Article   9-A.3 Treatment of Investments (6) 8
  • Article   9-A.4 Most-Favoured-Nation Treatment (7) 8
  • Article   9-A.5 Direct Expropriation (9) 8
  • Article   9-A.6 Compensation for Losses (10) 8
  • Article   9-A.7 Schedules of Non-Conforming Measures (11) 8
  • ANNEX 9-B   FOCAL POINTS OR OMBUDSPERSONS 8
  • ANNEX I  SCHEDULE OF SPECIFIC COMMITMENTS FOR INVESTMENT FOR ARGENTINA 8
  • ANNEX I   SCHEDULE OF SPECIFIC COMMITMENTS FOR INVESTMENT FOR PARAGUAY 8
  • ANNEX I   SCHEDULE OF SPECIFIC COMMITMENTS FOR INVESTMENT FOR URUGUAY 8
  • ANNEX III   SCHEDULE OF RESERVATIONS AND NON-CONFORMING MEASURES FOR SERVICES AND INVESTMENT FOR BRAZIL 8
  • LIST A OF BRAZIL 8
  • LIST B OF BRAZIL 10
  • APPENDIX TO LIST B COMMITMENTS FOR FINANCIAL SERVICES BRAZIL 11
  • ANNEX III   SCHEDULE OF RESERVATIONS AND NON-CONFORMING MEASURES FOR SERVICES AND INVESTMENT FOR SINGAPORE 12
  • LIST A OF SINGAPORE 12
  • LIST B OF SINGAPORE 12
  • Chapter   10 TRADE IN SERVICES 13
  • Chapter   11 MOVEMENT OF NATURAL PERSONS 15
  • Chapter   12 ELECTRONIC COMMERCE 15
  • Chapter   13 GOVERNMENT PROCUREMENT 16
  • Chapter   14 COMPETITION POLICY 18
  • Chapter   15 INTELLECTUAL PROPERTY 19
  • Chapter   16 MICRO, SMALL AND MEDIUM-SIZED ENTERPRISES 20
  • Chapter   17 TRANSPARENCY 20
  • Chapter   18 DISPUTE SETTLEMENT 21
  • ANNEX 18-A   RULES OF PROCEDURE FOR ARBITRATION 22
  • ANNEX 18-B   CODE OF CONDUCT 22
  • Chapter   19 INSTITUTIONAL, GENERAL AND FINAL PROVISIONS 22