(b) the results of the controls carried out under the exporting Party's inspection and certification system.
The Parties shall carry out those audits in accordance with the SPS Agreement, taking into account the relevant international standards, guidelines and recommendations of the Codex Alimentarius, OIE or IPPC.
2. The importing Party may conduct audits by requesting information from the exporting Party or by audit visits to the exporting Party.
3. An audit visit shall be carried out under the conditions agreed in advance by the Parties.
4. The importing Party shall provide the exporting Party with the opportunity to comment in writing on the findings of the audit. The importing Party shall take any such comments into account before reaching its conclusions and taking any action thereon. The importing Party shall, without undue delay, provide the exporting Party with a written report setting out its conclusions.
5. The costs for an audit visit shall be borne by the importing Party unless otherwise agreed by the Parties.
Article 6.9. Procedure for Listing of Establishments or Facilities
1. When required by the importing Party, the competent authorities of the exporting Party shall ensure that lists of establishments and facilities which comply with the importing Party's import conditions are drawn up, kept updated and communicated to the importing Party.
2. The importing Party may request the exporting Party to provide information which is necessary to consider the lists referred to in paragraph 1. Unless additional information is required to verify the entries on the lists, the importing Party shall take the necessary measures to allow imports from the listed establishments and facilities without undue delay. Without prejudice to Article 6.13, such measures shall not include prior inspection unless such inspection is required by each Party's laws and regulations or otherwise agreed by the Parties.
3. The importing Party may conduct audits in accordance with Article 6.8.
4. The importing Party shall make the lists referred to in paragraph 1 publicly available as appropriate.
5. A Party shall notify the other Party of its intention to introduce new laws and regulations within the scope of this Article and allow the other Party to provide comments thereon.
Article 6.10. Adaptation to Regional Conditions
1. With regard to animals, animal products and animal by-products, the Parties recognise the concept of zone and compartment specified in the OIE Terrestrial Animal Health Code and the OIE Aquatic Animal Health Code.
2. When establishing or maintaining sanitary import conditions on the request of the exporting Party, the importing Party shall recognise the zones or compartments established by the exporting Party as a basis for consideration towards the determination of allowing or maintaining the import.
3. The exporting Party shall identify its zones or compartments referred to in paragraph 2 and, on request of the importing Party, provide a full explanation and supporting data based on the OIE Terrestrial Animal Health Code or the OIE Aquatic Animal Health Code, or in other ways as deemed appropriate by the Parties on the basis of the knowledge acquired through experience of the exporting Party's competent authorities.
4. Each Party shall ensure that the procedures and obligations established by paragraphs 2 and 3 are carried out without undue delay.
5. Unless the Parties agree otherwise, the Parties will, through the Committee on Sanitary and Phytosanitary Measures, exchange information on a way to establish and maintain mutual recognition of health status, based on the OIE Terrestrial Animal Health Code and recommendations adopted by the OIE.
6. Each Party may establish the zones or compartments referred to in paragraph 2 for diseases not covered by the OIE Terrestrial Animal Health Code or the OIE Aquatic Animal Health Code and agree with the other Party to apply such zones or compartments in the trade between the Parties.
7. With regard to plants and plant products, the Parties recognise the concepts of pest free areas, pest free places of production, pest free production sites and areas of low pest prevalence specified in the International Standards for Phytosanitary Measures developed under the IPPC.
8. When establishing or maintaining phytosanitary import conditions on request of the exporting Party, the importing Party shall recognise the pest free areas, pest free places of production, pest free production sites and areas of low pest prevalence established by the exporting Party as a basis for consideration towards the determination to allow or maintain the import.
9. The exporting Party shall identify its pest free areas, pest free places of production, pest free production sites and areas of low pest prevalence. If requested by the importing Party, the exporting Party shall provide a full explanation and supporting data based on the relevant International Standards for Phytosanitary Measures developed under the IPPC, or in other ways as deemed appropriate by the Parties, based on the knowledge acquired through experience of the exporting Party's relevant phytosanitary authorities.
10. Inimplementing paragraphs 7 to 9, technical consultations and audits may be carried out. Technical consultations shall take place in accordance with Article 6.12. The audits shall be carried out in accordance with Article 6.8, taking into account the biology of the pest and the commodity concerned.
11. Each Party shall ensure that the procedures and obligations set out in paragraphs 8 to 10 are carried out without undue delay.
Article 6.11. Transparency and Exchange of Information
1. Each Party shall, in accordance with Article 7 of the SPS Agreement and Annexes B and C to the SPS Agreement:
(a) ensure transparency as regards:
(i) sanitary and phytosanitary measures, including import conditions; and
(ii) control, inspection and approval procedures, including complete details about the mandatory administrative steps, expected timelines and the authorities in charge of receiving import applications and of processing them;
(b) enhance mutual understanding of each Party's sanitary and phytosanitary measures and their application; and
(c) on a reasonable request of the other Party and as soon as possible, provide information on its sanitary and phytosanitary measures and their application, including:
(i) import conditions that apply to the import of specific products;
(ii) the state of progress of applications for authorisation of specific products;
(iii) the frequency of import checks carried out on products from the other Party; and
(iv) matters related to the development and application of its sanitary and phytosanitary measures, including the progress concerning new available scientific evidence, that affect or may affect trade between the Parties with a view to minimising their negative effects.
2. When the information referred to in subparagraphs 1(a) and (c) has been made available by notification of a Party under the SPS Agreement, or when such information has been made available on an official, publicly accessible and free of charge website of that Party, the information referred to in subparagraphs 1(a) and (c) shall be considered to have been provided.
Article 6.12. Technical Consultations
1. Where a Party has significant concerns regarding human, animal or plant life or health, or measures proposed or implemented by the other Party, that Party may request technical consultations.
2. The other Party shall respond to such a request without undue delay and shall engage in the technical consultations to address those concerns.
3. Each Party shall endeavour to provide the information necessary to avoid a disruption in trade or to reach a mutually acceptable solution.
4. Where the Parties have already established other mechanisms than those referred to in this Article to address the concerns, they shall make use of them to the extent possible in order to avoid unnecessary duplication.
5. Each Party may terminate technical consultations by notifying the other Party in writing at any time no less than 90 days after the date of receipt of the response by the other Party referred to in paragraph 2, or any other time period as agreed by the Parties.
Article 6.13. Emergency Measures
1. A Party may adopt emergency measures that are necessary for the protection of human, animal or plant life or health. When adopting such emergency measures the competent authority of that Party shall:
(a) immediately notify the competent authorities of the other Party of such emergency measures;
(b) allow the other Party to submit comments in writing;
(c) engage, if necessary, in technical consultations as referred to in Article 6.12; and
(d) take into account the comments referred to in subparagraph (b) and the results of technical consultations referred to in subparagraph (c).
2. In order to avoid unnecessary disruptions to trade, the importing Party shall consider information provided in a timely manner by the exporting Party when making decisions with respect to consignments that, at the time of adoption of emergency measures, are being transported between the Parties.
3. The importing Party shall ensure that any emergency measure referred to in paragraph 1 is not maintained without scientific evidence. In cases where scientific evidence is insufficient, the importing Party may provisionally adopt emergency measures on the basis of available pertinent information, including that from the relevant international organisation. The importing Party shall review the emergency measure with a view to minimising its negative effect on trade by either repealing that measure or replacing it by a permanent measure.
Article 6.14. Equivalence
1. The importing Party shall accept sanitary and phytosanitary measures of the exporting Party as equivalent if the exporting Party objectively demonstrates to the importing Party that its measures achieve the importing Party's appropriate level of protection. For that purpose, reasonable access shall be given, upon request, to the importing Party for inspection, testing and other relevant procedures.
2. The Parties shall, on request of either Party, enter into consultations with the aim of achieving arrangements determining the equivalence of specified sanitary and phytosanitary measures.
3. In determining the equivalence of sanitary and phytosanitary measures, the Parties shall take into account the relevant guidance of the WTO Committee on Sanitary and Phytosanitary Measures, in particular its Decision on the Implementation of Article 4 of the Agreement on the Application of Sanitary and Phytosanitary Measures (1) and international standards, guidelines and recommendations of the Codex Alimentarius, OIE or IPPC.
4. Where equivalence has been determined, the Parties may agree on alternative import conditions and simplified certificates, taking into account international standards, guidelines or recommendations of the Codex Alimentarius, OIE or IPPC.
Article 6.15. Committee on Sanitary and Phytosanitary Measures
1. The Committee on Sanitary and Phytosanitary Measures established pursuant to Article 23.3 shall be responsible for the effective implementation and operation of this Chapter.
2. The objectives of the Committee on Sanitary and Phytosanitary Measures are to:
(a) enhance each Party's implementation of this Chapter;
(b) consider sanitary and phytosanitary matters of mutual interest; and
(c) enhance communication and cooperation on sanitary and phytosanitary matters of mutual interest.
3. The Committee on Sanitary and Phytosanitary Measures:
(a) shall provide a forum to improve the Parties' understanding of sanitary and phytosanitary matters that relate to the implementation of the SPS Agreement;
(b) shall provide a forum to enhance mutual understanding of each Party's sanitary and phytosanitary measures and the related regulatory processes;
(c) shall monitor, review and exchange information on the implementation and operation of this Chapter;
(d) shall serve as a forum to address the concerns referred to in paragraph 1 of Article 6.12 witha view to reaching mutually acceptable solutions provided that the Parties have first attempted to address them through the technical consultations pursuant to Article 6.12 and other topics agreed by the Parties;
(e) shall determine the appropriate means, which may include ad hoc working groups, to undertake specific tasks related to the functions of the Committee on Sanitary and Phytosanitary Measures;
(f) may identify and consider technical cooperation projects between the Parties in relation to the development, implementation and application of sanitary and phytosanitary measures; and
(g) may consult on matters and positions for the meetings of the WTO Committee on Sanitary and Phytosanitary Measures and meetings held under the auspices of the Codex Alimentarius, OIE and IPPC.
4. The Committee on Sanitary and Phytosanitary Measures shall be composed of representatives of the Parties who are in charge of sanitary and phytosanitary measures with the relevant expertise.
5. The Committee on Sanitary and Phytosanitary Measures shall establish its rules of procedure and may revise those rules as necessary.
6. The Committee on Sanitary and Phytosanitary Measures shall hold the first meeting within one year of the date of entry into force of this Agreement.
Article 6.16. Dispute Settlement
The provisions of this Chapter shall not be subject to dispute settlement under Chapter 22.
Chapter 7. TECHNICAL BARRIERS TO TRADE
Article 7.1. Objectives
The objectives of this Chapter are to facilitate and to increase trade in goods between the Parties by:
(a) ensuring that technical regulations, standards and conformity assessment procedures do not create unnecessary obstacles to trade;
(b) enhancing joint cooperation between the Parties, including on the implementation of the TBT Agreement; and
(c) pursuing appropriate ways to reduce unnecessary negative effects on trade by measures within the scope of this Chapter.
Article 7.2. Scope
1. This Chapter applies to the preparation, adoption and application of technical regulations, standards and conformity assessment procedures of central government bodies, as defined in the TBT Agreement, that may affect trade in goods between the Parties.
2. Each Party shall take such reasonable measures as may be available to it to encourage the observance of the provisions of Articles 7.5 to 7.11 by local government bodies within its territory on the level directly below that of the central government!, which are responsible for the preparation, adoption and application of technical regulations, standards and conformity assessment procedures.
3. This Chapter does not apply to:
(a) purchasing specifications prepared by a governmental body for its production or consumption requirements; or
(b) sanitary and phytosanitary measures as defined in Annex A to the SPS Agreement.
Article 7.3. Incorporation of Certain Provisions of the TBT Agreement
1. The Parties affirm their rights and obligations under the TBT Agreement.
2. Articles 2 to 9 of the TBT Agreement and Annexes 1 and 3 to the TBT Agreement are incorporated into and made part of this Agreement, mutatis mutandis.
3. Where a dispute arises regarding a particular measure of a Party which the other Party alleges to be exclusively in breach of the provisions of the TBT Agreement referred to in paragraph 2, that other Party shall, notwithstanding paragraph 1 of Article 22.27, select the dispute settlement mechanism under the WTO Agreement.
For the purposes of this Chapter, for the United Kingdom, "local government bodies within its territory on the level directly below that of the central government" includes local government bodies on the level directly below that of the Government of the United Kingdom and the Devolved Administrations.
Article 7.4. Definitions
For the purposes of this Chapter, the terms and definitions set out in Annex 1 to the TBT Agreement apply.
Article 7.5. Technical Regulations
1. The Parties recognise the importance of good regulatory practices with regard to the preparation, adoption and application of technical regulations, in particular of the work carried out by the WTO Committee on Technical Barriers to Trade on good regulatory practices. In this context, each Party undertakes to:
(a) when developing a technical regulation:
(i) assess, in accordance with its laws and regulations or administrative guidelines, the available regulatory or non-regulatory alternatives to the proposed technical regulation that may fulfil its legitimate objective, in order to ensure that the proposed technical regulation is not more trade-restrictive than necessary to fulfil its legitimate objective, in accordance with paragraph 2 of Article 2 of the TBT Agreement; nothing in this provision shall affect the rights of each Party to prepare, adopt and apply measures without delay where urgent problems including safety, health, environmental protection or national security arise or threaten to arise;
(ii) endeavour to systematically carry out impact assessments for technical regulations with significant effect on trade, including an assessment of their impact on trade; and
(iii) specify, wherever appropriate, technical regulations based on product requirements in terms of performance rather than design or descriptive characteristics; and
(b) review, without prejudice to paragraph 3 of Article 2 of the TBT Agreement, adopted technical regulations at appropriate intervals, preferably not exceeding five years, in particular with a view to increasing their convergence with relevant international standards. In undertaking this review, each Party shall, inter alia, take into account any new development in the relevant international standards and whether the circumstances giving rise to divergences of that Party's technical regulations from any relevant international standard continue to exist. The outcome of this review shall be communicated and explained to the other Party on its request.
2. When a Party considers that its technical regulation and a technical regulation of the other Party that have the same objectives and product coverage are equivalent, that Party may request in writing, providing detailed reasons, that the other Party recognise those technical regulations as equivalent. The requested Party shall give positive consideration to accepting those technical regulations as equivalent, even if they differ, provided that it is satisfied that the technical regulation of the requesting Party adequately fulfils the objectives of its own technical regulation. If the requested Party does not accept a technical regulation of the requesting Party as equivalent, the requested Party shall, on request of the requesting Party, explain the reasons for its decision.
3. On request of a Party that has an interest in developing a technical regulation similar to a technical regulation of the other Party, the requested Party shall, to the extent practicable, provide the requesting Party with relevant information, including studies or documents, except for confidential information, on which it has relied in developing its technical regulation.
4. Each Party shall uniformly and consistently apply requirements relating to the placement of products on the market which are established in technical regulations applicable to its whole territory. If a Party has substantiated reasons to believe that any of these requirements are not applied uniformly and consistently in the territory of the other Party, and that this situation leads to significant impact on bilateral trade, that Party may notify the other Party of those substantiated reasons with a view to clarifying the issue, and, if appropriate, addressing it in a timely manner by the contact point referred to in Article 7.15 or by other appropriate bodies established under this Agreement.
Article 7.6. International Standards
1. For the purposes of applying this Chapter and the TBT Agreement, standards issued by international organisations such as the International Organisation for Standardisation (ISO), the International Electrotechnical Commission (IEC), the International Telecommunication Union (ITU), the Codex Alimentarius Commission, the International Civil Aviation Organisation (ICAO), the World Forum for Harmonisation of Vehicle Regulations (WP.29) within the framework of the United Nations Economic Commission for Europe (UNECE), the United Nations Sub-Committee of Experts on the Globally Harmonized System of Classification and Labelling of Chemicals (UNSCEGHS), and the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) shall be considered as relevant international standards as referred to in this Chapter, Articles 2 and 5 of the TBT Agreement and Annex 3 to the TBT Agreement, provided that in their development, the principles and procedures set out in the Decision of the WTO Committee on Technical Barriers to Trade on Principles for the Development of International Standards, Guides and Recommendations with Relation to Articles 2 and 5 of the TBT Agreement and Annex 3 to the TBT Agreement (1) have been followed, except when such standards or relevant parts of them would be ineffective or inappropriate for the fulfilment of the legitimate objectives pursued.
2. With a view to harmonising standards on as wide a basis as possible, each Party shall encourage national standardising bodies within its territory to:
(a) play a full part, within the limits of their resources, in the preparation by relevant international standardising bodies of international standards;
(b) use relevant international standards as a basis for the standards they develop, except where such international standards would be ineffective or inappropriate, for instance because of an insufficient level of protection or fundamental climatic or geographical factors or fundamental technological problems;
(c) avoid duplication of, or overlap with, the work of international standardising bodies; and
(d) review their standards which are not based on relevant international standards at appropriate intervals, preferably not exceeding five years, with a view to increasing their convergence with relevant international standards.
3. When developing technical regulations or conformity assessment procedures:
(a) each Party shall use relevant international standards, guides or recommendations, or the relevant parts of them, to the extent provided for in paragraph 4 of Article 2 and in paragraph 4 of Article 5 of the TBT Agreement, as a basis for its technical regulations and conformity assessment procedures and avoid deviations from the relevant international standards or additional requirements when compared to those standards, except when the Party developing the technical regulation or conformity assessment procedure can demonstrate, based on relevant information, including available scientific or technical evidence, that such international standards would be ineffective or inappropriate for the fulfilment of legitimate objectives pursued, as referred to in paragraph 2 of Article 2 and paragraph 4 of Article 5 of the TBT Agreement; and
(b) if a Party does not use relevant international standards, guides or recommendations, or the relevant parts of them, as referred to in paragraph 1, as a basis for its technical regulations or conformity assessment procedures, that Party shall, on request of the other Party, explain the reasons why it considers such international standards to be ineffective or inappropriate for the fulfilment of legitimate objectives pursued, as referred to in paragraph 2 of Article 2 and paragraph 4 of Article 5 of the TBT Agreement, and provide the relevant information, including available scientific or technical evidence on which this assessment is based, as well as identify the parts of the technical regulation or conformity assessment procedure concerned which in substance deviate from the relevant international standards, guides or recommendations.
4. Each Party shall encourage national standardising bodies within its territory to cooperate with the relevant standardising bodies of the other Party in international standardising activities. Such cooperation may take place in international standardising bodies of which both Parties or standardising bodies of both Parties are members. Such bilateral cooperation could aim, inter alia, at promoting the development of international standards, facilitating the development of common standards for both Parties in areas of shared interest where there are no international standards, in particular as regards new products or technologies, or further enhancing the exchange of information between the standardising bodies of the Parties.
Article 7.7. Standards
1. The Parties affirm their obligations under paragraph 1 of Article 4 of the TBT Agreement to ensure that national standardising bodies within their territories accept and comply with the Code of Good Practice for the Preparation, Adoption and Application of Standards in Annex 3 to the TBT Agreement.
2. The Parties recall that, pursuant to the definition of a standard in Annex 1 to the TBT Agreement, compliance with standards is not mandatory. Where compliance with a standard is required in a Party through incorporation of, or reference to, that standard in a technical regulation or conformity assessment procedure, the Party shall, in developing the draft technical regulation or conformity assessment procedure, comply with the transparency obligations set out in paragraph 9 of Article 2 or paragraph 6 of Article 5 of the TBT Agreement, and in Article 7.9.
3. Each Party shall encourage, subject to its laws and regulations, national standardising bodies within its territory to ensure adequate participation of interested persons within the territory of that Party in the standard development process and to allow persons of the other Party to participate in consultation procedures, which are available to the general public, on terms no less favourable than those accorded to its own persons.
4. The Parties undertake to exchange information on:
(a) each Party's use of standards in support of demonstrating or facilitating compliance with technical regulations;
(b) their standard setting processes, in particular the manner and extent to which international or regional standards are used as a basis for their national standards; and
(c) cooperation agreements or arrangements on standardisation with third parties or international organisations.
Article 7.8. Conformity Assessment Procedures
1. With respect to the preparation, adoption and application of technical regulations, subparagraphs 1(a)(i), 1(a)(ii) and 1(b) of Article 7.5 also apply, mutatis mutandis, to conformity assessment procedures.
2. In conformity with paragraph 1.2 of Article 5 of the TBT Agreement, each Party shall ensure that conformity assessment procedures are not stricter or are not applied more strictly than is necessary to give the importing Party adequate confidence that products conform with the applicable technical regulations or standards, taking into account the risks associated with products, including the risks that non-conformity would create.
3. The Parties recognise that a broad range of mechanisms exist to facilitate the acceptance of the results of conformity assessment procedures. Such mechanisms may include:
(a) mutual recognition agreements for the results of conformity assessment procedures with respect to specific technical regulations conducted by bodies located in the territory of the other Party;
(b) cooperative and voluntary arrangements between conformity assessment bodies located in the territories of the Parties;
(c) plurilateral and multilateral recognition agreements or arrangements to which both Parties are participants;
(d) the use of accreditation to qualify conformity assessment bodies;
(e) government designation of conformity assessment bodies, including conformity assessment bodies located in the other Party;
(f) recognition by a Party of results of conformity assessment procedures conducted in the territory of the other Party; and
(g) manufacturer's or supplier's declaration of conformity.
4. The Parties shall exchange information regarding the mechanisms covered by paragraph 3. A Party shall, on request of the other Party, provide information on:
(a) the mechanisms referred to in paragraph 3 and similar mechanisms with a view to facilitating the acceptance of the results of conformity assessment procedures;
(b) factors, including assessment and management of risk, considered when selecting appropriate conformity assessment procedures for specific products; and
(c) accreditation policy, including on international standards for accreditation, and international agreements and arrangements in the field of accreditation, including those of the International Laboratory Accreditation Cooperation (ILAC) and the International Accreditation Forum (IAF), to the extent possible and used by a Party in a specific area.
5.With regard to those mechanisms each Party shall:
(a) use, whenever possible and in accordance with its laws and regulations, a supplier's declaration of conformity as assurance of conformity with the applicable technical regulations;
(b) use accreditation with authority derived from government or performed by government, as appropriate, as a means to demonstrate technical competence to qualify conformity assessment bodies;
(c) if accreditation is established by law as a necessary separate step to qualify conformity assessment bodies, ensure that accreditation activities are independent from conformity assessment activities and that there are no conflicts of interest between accreditation bodies and the conformity assessment bodies they accredit; the Parties may comply with this obligation by means of the separation of conformity assessment bodies from accreditation bodies; (1)
(d) consider joining or, as applicable, not prohibit testing, inspection and certification bodies from joining, international agreements or arrangements for the facilitation of acceptance of conformity assessment results; and
(e) if two or more conformity assessment bodies are authorised by a Party to carry out conformity assessment procedures required for placing a product on the market, not prohibit economic operators from choosing among conformity assessment bodies.
6. The Parties shall cooperate in the field of mutual recognition in accordance with the Protocol on Mutual Recognition. The Parties may also decide, in accordance with relevant provisions of the Protocol on Mutual Recognition, to extend the coverage as regards to the products, the applicable regulatory requirements and the recognised conformity assessment bodies.
Article 7.9. Transparency
1. When developing a technical regulation or conformity assessment procedure which may have a significant effect on trade, each Party shall:
(a) carry out consultation procedures, subject to its laws and regulations, which are available to the general public and make the results of such consultation procedures and any existing impact assessments publicly available;