Article 5.3. Accumulation
1. Originating materials from the territory of a Party, used in the production of a good in the territory of the other Party, shall be considered to originate in the territory of the other Party.
2. A good is an originating good when it is produced in the territory of one or both Parties by one or more producers, provided that the good satisfies the requirements in Article 5.1 and all other applicable requirements of this Chapter or Chapter 4.
Article 5.4. Regional Value Content
1. Except for goods covered by paragraph 2, where Annex 5-A refers to a regional value content, cach Party shall provide that for purposes of claims for preferential treatment in accordance with Article 5.12, an importer, exporter, or producer may calculate regional value content based on one of the following methods:
(a) Build-down Method
RVC = AV-VNM x 100
AV
where
RVC is the regional value content, expressed as a percentage;
AV is the adjusted value; and
VNM is the value of non-originating materials that are acquired and used by the producer in the production of the good. VNM does not include the value of a material that is self-produced.
(b) Build-up Method
RVC = VOM x 100
AV
where
RVC is the regional value content, expressed as a percentage;
AV is the adjusted value; and
VOM. is the value of originating materials that are acquired or self-produced, and used by the producer in the production of the good.
2. When regional value content is required for certain automotive goods (5-2) under Annex 5-A to determine if a good is originating, each Party shall provide that the regional value content of a good shall be calculated solely on the basis of the following method:
Method for Automotive Products ("Net Cost Method")
RVC =NC - VNM x 100
NC
where
RVC is the regional value content, expressed as a percentage; NC _ is the net cost of the good;
VNM is the value of non-originating materials acquired and used by the producer in the production of the good. VNM does not include the value of a material that is self-produced.
3. Each Party shall provide that, for the purpose of regional value content under paragraph 2 for motor vehicles, (5-3) the importer, exporter, or producer may use a calculation averaged over the producer's fiscal year using any one of the following categories:
(a) the same model line of motor vehicles in the same class of vehicles produced in the same plant in the territory of a Party;
(b) the same class of motor vehicles produced in the same plant in the territory of a Party; or
(c) the same model line of motor vehicles produced in the territory of a Party,
on the basis of all motor vehicles in the category or only those motor vehicles in the category that are exported to the territory of the other Party.
4. Each Party shall provide that, for the purpose of calculating regional value content under paragraph 2 for automotive materials (5-3) produced in the same plant, the importer, exporter, or producer may use a calculation:
(a) averaged: over the fiscal year of the motor vehicle producer to whom the good is sold,
(i) over any quarter or month, or
(ii) over its fiscal year,
provided that the good was produced during the fiscal year, quarter, or month forming the basis for the calculation;
(c) in which the average referred to in subparagraph (a) is calculated separately for such goods sold to one or more motor vehicle producers; or
in which the average in subparagraph (a) or (b) is calculated separately for those goods that are exported to the territory of the other Party.
Article 5.5. Walue of Materials
1. Each Party shall provide that for the purpose of Articles 5.2 and 5.4, the value of a material is:
(a) for a material imported by the producer of the good, the adjusted value of the material;
(b) for a material acquired in the territory where the good is produced, the value, determined in accordance with Articles 1 through 8, Article 15, and the corresponding interpretative notes of the Customs Valuation Agreement, i.e., in the same manner as for imported goods, with such reasonable modifications as may be required due to the absence of an importation; or
(c) for a material that is self-produced, the sum of all expenses incurred in the production of the material, including general expenses, and an amount for profit equivalent to the profit added in the normal course of trade.
2. Each Party shall provide that the value of materials may be adjusted as follows:
(a) for originating materials, the following expenses may be added to the value of the material if not included under paragraph 1:
(i) the costs of freight, insurance, packing, and all other costs incurred in transporting the material within or between the Parties' territories to the location of the producer;
(ii) duties, taxes, and customs brokerage fees on the material paid in the territory of one or both of the Parties, other than duties and taxes that are waived, refunded, refundable, or otherwise recoverable, including credit against duty or tax paid or payable; and
(iii) the cost of waste and spoilage resulting from the use of the material in the production of the good, less the value of renewable scrap or by-products; and
(b) for non-originating materials, where included under paragraph 1, the following expenses may be deducted from the value of the material:
(i) the costs of freight, insurance, packing, and all other costs incurred in transporting the material within or between the Parties' territories to the location of the producer;
(ii) duties, taxes, and customs brokerage fees on the material paid in the territory of one or both of the Parties, other than duties and taxes that are waived, refunded, refundable, or otherwise recoverable, including credit against duty or tax paid or payable;
(iii) the cost of waste and spoilage resulting from the use of the material in the production of the good, less the value of renewable scrap or by-products;
(iv) the cost of processing incurred in the territory of a Party in the production of the non-originating material; and
(v) the cost of originating materials used in the production of the non- originating material in the territory of a Party.
Article 5.6. Accessories, Spare Parts, and Tools
Each Party shall provide that accessories, spare parts, or tools delivered with a good that form part of the good's standard accessories, spare parts, or tools, shall be treated as originating goods if the good is an originating good, and shall be disregarded in determining whether all the non- originating materials used in the production of the good undergo the applicable change in tariff classification, provided that:
(a) the accessories, spare parts, or tools are not invoiced separately from the good;
(b) the quantities and value of the accessories, spare parts, or tools are customary for the good; and
(c) if the good is subject to a regional value content requirement, the value of the accessories, spare parts, or tools shall be taken into account as originating or non-
originating materials, as the case may be, in calculating the regional value content of the good.
Article 5.7. Fungible Goods and Materials
1. Each Party shall provide that the determination of whether fungible goods or materials are originating goods shall be made cither by physical segregation of each good or material or through the use of any inventory management method, such as averaging, last-in first-out, or first-in first-out, recognized in the generally accepted accounting principles of the Party in which the production is performed or otherwise accepted by the Party in which the production is performed.
2. Each Party shall provide that that an inventory management method selected under paragraph 1 for particular fungible goods or materials shall continue to be used for those fungible goods or materials throughout the fiscal year of the person that selected the inventory management method.
Article 5.8. Packaging Materials and Containers for Retail Sale
Each Party shall provide that packaging materials and containers in which a good is packaged for retail sale, if classified with the good, shall be disregarded in determining whether all the non- originating materials used in the production of the good undergo the applicable change in tariff classification set out in Annex 5-A or Annex 4-A, and, if the good is subject to a regional value content requirement, the value of such packaging materials and containers shall be taken into account as originating or non-originating materials, as the case may be, in calculating the regional value content of the good.
Article 5.9. Packing Materials and Containers for Shipment
Each Party shall provide that packing materials and containers for shipment shall be disregarded in determining whether:
(a) the non-originating materials used in the production of the good undergo the applicable change in tariff classification set out in Annex 5-A or Annex 4-A; and
(b) the good satisfies a regional value content requirement.
Article 5.10. Indirect Materials
Each Party shall provide that an indirect material shall be treated as an originating material without regard to where it is produced and its value shall be the cost registered in the accounting records of the producer of the good.
Article 5.11. Third Country Transportation
A good shall not be considered to be an originating good if the good undergoes subsequent production or any other operation outside the territories of the Parties, other than unloading, reloading, or any other operation necessary to preserve it in good condition or to transport the good to the territory of a Party.
Section B. Supporting Information and Verification
Article 5.12. Claims for Preferential Treatment
1. Each Party shall provide that an importer may make a claim for preferential treatment under this Agreement based on the importer's knowledge or on information in the importer's possession that the good qualifies as an originating good.
2. Each Party may require that an importer be prepared to submit, on request, a statement setting forth the reasons that the good qualifies as an originating good, including pertinent cost and manufacturing information. The statement need not be in a prescribed format, and may be submitted electronically, where feasible.
Article 5.13. Obligations Relating to Importations
1. Each Party shall grant a claim for preferential treatment under this Agreement, made in accordance with this Chapter unless the Party possesses information that the claim is invalid.
2. A Party may deny preferential treatment under this Agreement to an imported good if the importer fails to comply with any requirement of this Chapter.
3. If a Party denies a claim for preferential treatment under this Agreement, it shall issue a written determination containing findings of fact and the legal basis for the determination.
4. The importing Party shall not subject an importer to any penalty for making an invalid claim for preferential treatment if the importer:
(a) on becoming aware that such claim is not valid, promptly and voluntarily corrects the claim and pays any duty owing; and
(b) in any event, corrects the claim and pays any duty owing within a period determined by the Party, which shall be at least one year from the submission of the invalid claim.
5. Nothing in this Article shall prevent a Party from taking action under Article 4.3.8 (Customs Cooperation).
Article 5.14. Record Keeping Requirement
Each Party may require that importers maintain, for up to five years after the date of importation, records relating to the importation of the good, and may require, as set out in Article 5.12.2, that an importer provide, on request, records necessary to demonstrate that a good qualifies as an originating good, including records concerning:
(a) the purchase, cost and value of, and payment for, the good;
(b) the purchase, cost, and value of, and payment for, all materials, including indirect materials, used in the production of the good; and
(c) the production of the good in the form in which the good was exported.
Article 5.15. Verification
1. For the purpose of determining whether a good imported into its territory from the territory of the other Party qualifies as an originating good, a Party may conduct a verification by means of one or more of the following:
(a) requests for information from the importer;
(b) written requests for information to an exporter or a producer in the territory of the other Party;
(c) requests for the importer to arrange for the producer or exporter to provide information directly to the Party conducting the verification;
(d) information received directly by the importing Party from an importer as a result of a request described in Article 5.12.2;
(e) visits to the premises of an exporter or a producer in the territory of the other Party, in accordance with any procedures that the Parties jointly adopt;
OD for textile or apparel goods, procedures set forth in Article 4.3 (Customs Cooperation); or
(g) such other procedures as the Parties may agree.
2. A Party may deny preferential tariff treatment to a good where the importer, exporter, or producer fails to provide information that the Party requests in a verification conducted in accordance with paragraph 1 demonstrating that the good is an originating good.
Section C. Consultation and Modifications
Article 5.16. Consultation and Modifications
1. The Parties shall consult and cooperate to ensure that this Chapter is applied in an effective and uniform manner. Unless the Parties otherwise agree, the Parties shall consult within six months of the date of entry into force of this Agreement regarding the implementation and application of this Chapter.
2. The Parties shall consult regularly pursuant to Article 21.5 (Consultations) to discuss necessary amendments to this Chapter and its Annexes, taking into account developments in technology, production processes, and other related matters.
Section D. Application and Interpretation
Article 5.17. Application and Interpretation
For the purposes of this Chapter:
(a) the basis for tariff classification is the Harmonized System,
(b) any cost and value referred to in this Chapter shall be recorded and maintained in accordance with the generally accepted accounting principles applicable in the territory of the Party in which the good is produced.
Section E. Definitions
Article 5.18. Definitions
For the purposes of this Chapter:
1. adjusted value means the value determined under Articles 1 through 8, Article 15, and the corresponding interpretative notes of the Customs Valuation Agreement, as adjusted to exclude any costs, charges, or expenses incurred for transportation, insurance, and related services incidental to the international shipment of the good from the country of exportation to the place of importation;
2. class of motor vehicles means any one of the following categories of motor vehicles:
(a) motor vehicles provided for in subheading 8701.20, motor vehicles for the transport of 16 or more persons provided for in subheadings 8702.10 or 8702.90, and motor vehicles of subheadings 8704.10, 8704.22, 8704.23, 8704.32, or 8704.90, or headings 87.05 and 87.06;
(b) motor vehicles provided for in subheadings 8701.10 or 8701.30 through 8701.90;
(c) motor vehicles for the transport of 15 or fewer persons provided for in subheadings 8702.10 or 8702.90, and motor vehicles of subheadings 8704.21 and 8704.31; or
(d) motor vehicles provided for in subheadings 8703.21 through 8703.90;
3. fungible goods or materials means goods or materials that are interchangeable for commercial purposes and whose properties are essentially identical;
4. generally accepted accounting principles means the recognized consensus or substantial authoritative support in the territory of a Party, with respect to the recording of revenues, expenses, costs, assets, and liabilities, the disclosure of information, and the preparation of financial statements. These standards may encompass broad guidelines of general application as well as detailed standards, practices, and procedures;
5. good wholly obtained or produced entirely in the territory of one or both of the Parties means a good that is:
(a) a mineral good extracted there;
(b) a vegetable good, as such good is defined in the Harmonized System, harvested there;
(c) a live animal born and raised there;
(d) a good obtained from hunting, trapping, fishing, or aquaculture conducted there;
(e) a good (fish, shellfish, and any other marine life) taken from the sea by vessels registered or recorded with a Party and flying its flag;
(f) a good produced exclusively from products referred to in subparagraph (e) on board factory ships registered or recorded with a Party and flying its flag;
(g) a good taken by a Party, or a person of a Party, from the seabed or beneath the seabed outside territorial waters, provided that the Party has rights to exploit such seabed;
(h) a good taken from outer space, provided it is obtained by a Party or a person of a Party and not processed in the territory of a non-Party;
(i) waste and scrap derived from
(i) production there; or
(ii) used goods collected there, provided such goods are fit only for the recovery of raw materials;
(j) a recovered good derived there, from goods that have passed their life expectancy, or are no longer useable duc to defects, and utilized there in the production of remanufactured goods; or
(k) a good produced there exclusively from goods referred to in subparagraphs (a) through (i), or from their derivatives, at any stage of production;
6. indirect material means a good used in the production, testing, or inspection of a good but not physically incorporated into the good, or a good used in the maintenance of buildings or the operation of equipment associated with the production of a good, including:
(a) fuel and energy;
(b) tools, dies, and moulds;
(c) spare parts and materials used in the maintenance of equipment and buildings;
(d) lubricants, greases, compounding materials, and other materials used in production or used to operate equipment and buildings;
(e) gloves, glasses, footwear, clothing, safety equipment, and supplies;
(f) equipment, devices, and supplies used for testing or inspecting the goods;
(g) catalysts and solvents; and
(h) any other goods that are not incorporated into the good but whose use in the production of the good can reasonably be demonstrated to be a part of that production;
7. material means a good that is used in the production of another good;
8. material that is self-produced means an originating material that is produced by a producer of a good and used in the production of that good;
9. model line means a group of motor vehicles having the same platform or model name;
10. net cost means total cost minus sales promotion, marketing, and after-sales service costs, royalties, shipping and packing costs, and non-allowable interest costs that are included in the total cost;
11. net cost of the good means the net cost that can be reasonably allocated to the good under one of the following methods: