Technical Specifications
1. A procuring entity shall not prepare, adopt or apply any technical specification or prescribe any conformity assessment procedure with the purpose or the effect of creating unnecessary obstacles to trade between the Parties.
2. In prescribing the technical specifications for the goods or services being procured, a procuring entity shall, where appropriate:
(a) set out the technical specification in terms of performance and functional requirements, rather than design or descriptive characteristics; and
(b) base the technical specification on international standards, where such exist; otherwise, on national technical regulations, recognised national standards or building codes.
3. Where design or descriptive characteristics are used in the technical specifications, a procuring entity should indicate, where appropriate, that it will consider tenders of equivalent goods or services that demonstrably fulfill the requirements of the procurement by including words such as “or equivalent” in the tender documentation.
4. A procuring entity shall not prescribe technical specifications that require or refer to a particular trademark or trade name, patent, copyright, design, type, specific origin, producer or supplier, unless there is no other sufficiently precise or intelligible way of describing the procurement requirements and provided that, in such cases, the entity includes words such as “or equivalent” in the tender documentation.
5. A procuring entity shall not seek or accept, in a manner that would have the effect of precluding competition, advice that may be used in the preparation or adoption of any technical specification for a specific procurement from a person that may have a commercial interest in the procurement.
6. For greater certainty, a Party, including its procuring entities, may, in accordance with this Article, prepare, adopt or apply technical specifications to promote the conservation of natural resources or protect the environment.
Tender Documentation
7. A procuring entity shall make available to suppliers tender documentation that includes all information necessary to permit suppliers to prepare and submit responsive tenders. Unless already provided in the notice of intended procurement, such documentation shall include a complete description of:
(a) the procurement, including the nature and the quantity of the goods or services to be procured or, where the quantity is not known, the estimated quantity and any requirements to be fulfilled, including any technical specifications, conformity assessment certification, plans, drawings or instructional materials;
(b) any conditions for participation of suppliers, including a list of information and documents that suppliers are required to submit in connection with the conditions for participation;
(c) all evaluation criteria the entity will apply in the awarding of the contract, and, except where price is the sole criterion, the relative importance of such criteria;
(d) where the procuring entity will conduct the procurement by electronic means, any authentication and encryption requirements or other requirements related to the submission of information by electronic means;
(e) where the procuring entity will hold an electronic auction, the rules, including identification of the elements of the tender related to the evaluation criteria, on which the auction will be conducted;
(f) where there will be a public opening of tenders, the date, time and place for the opening and, where appropriate, the persons authorised to be present;
(g) any other terms or conditions, including terms of payment and any limitation on the means by which tenders may be submitted, such as whether on paper or by electronic means; and
(h) any dates for the delivery of goods or the supply of services.
8. In establishing any date for the delivery of goods or the supply of services being procured, a procuring entity shall take into account such factors as the complexity of the procurement, the extent of subcontracting anticipated and the realistic time required for production, de-stocking and transport of goods from the point of supply or for supply of services.
9. The evaluation criteria set out in the notice of intended procurement or tender documentation may include, among others, price and other cost factors, quality, technical merit, environmental characteristics and terms of delivery.
10. A procuring entity shall:
(a) promptly make available tender documentation to ensure that interested suppliers have sufficient time to submit responsive tenders;
(b) promptly provide, on request, the tender documentation to any interested supplier; and
(c) without undue delay, reply to any reasonable request for relevant information by any interested or participating supplier, provided that such information does not give that supplier an advantage over other suppliers.
Modifications
11. Where, prior to the award of a contract, a procuring entity modifies the criteria or requirements set out in the notice of intended procurement or tender documentation provided to participating suppliers, or amends or reissues a notice or tender documentation, it shall transmit in writing all such modifications or amended or re-issued notice or tender documentation:
(a) to all suppliers that are participating at the time of the modification, amendment or re issuance, where such suppliers are known to the entity, and in all other cases, in the same manner as the original information was made available; and
(b) in adequate time to allow such suppliers to modify and re-submit amended tenders, as appropriate.
Article 13.11. Time Periods
General
1. A procuring entity shall, consistent with its own reasonable needs, provide sufficient time for suppliers to prepare and submit requests for participation and responsive tenders, taking into account such factors as:
(a) the nature and complexity of the procurement;
(b) the extent of subcontracting anticipated; and
(c) the time necessary for transmitting tenders by non-electronic means from foreign as well as domestic points where electronic means are not used.
Such time-periods, including any extension of the time-periods, shall be the same for all interested or participating suppliers.
Deadlines
2. A procuring entity that uses selective tendering shall establish that the final date for the submission of requests for participation shall not, in principle, be less than 25 days from the date of publication of the notice of intended procurement. Where a state of urgency duly substantiated by the procuring entity renders this time-period impracticable, the time-period may be reduced to not less than 10 days.
3. Except as provided for in paragraphs 4, 5, 7 and 8, a procuring entity shall establish that the final date for the submission of tenders shall not be less than 40 days from the date on which:
(a) in the case of open tendering, the notice of intended procurement is published; or
(b) in the case of selective tendering, the entity notifies suppliers that they will be invited to submit tenders, whether or not it uses a multi-use list.
4. A procuring entity may reduce the time-period for tendering established in accordance with paragraph 3 to not less than 10 days where:
(a) the procuring entity has published a notice of planned procurement as described in paragraph 4 of Article 13.7 (Notices) at least 40 days and not more than 12 months in advance of the publication of the notice of intended procurement, and the notice of planned procurement contains:
(i) a description of the procurement;
(ii) the approximate final dates for the submission of tenders or requests for participation;
(iii) a statement that interested suppliers should express their interest in the procurement to the procuring entity;
(iv) the address from which documents relating to the procurement may be obtained; and
(v) as much of the information that is required for the notice of intended procurement under paragraph 2 of Article 13.7 (Notices), as is available;
(b) the procuring entity, for recurring contracts, indicates in an initial notice of intended procurement that subsequent notices will provide time-periods for tendering based on this paragraph; or
(c) a state of urgency duly substantiated by the procuring entity renders the time-period for tendering established in accordance with paragraph 3 impracticable.
5. A procuring entity may reduce the time-period for tendering established in accordance with paragraph 3 by five days for each one of the following circumstances:
(a) the notice of intended procurement is published by electronic means;
(b) all the tender documentation is made available by electronic means from the date of the publication of the notice of intended procurement; and
(c) the entity accepts tenders by electronic means.
6. The use of paragraph 5, in conjunction with paragraph 4, shall in no case result in the reduction of the time-period for tendering established in accordance with paragraph 3 to less than 10 days from the date on which the notice of intended procurement is published.
7. Notwithstanding any other provision in this Article, where a procuring entity purchases commercial goods or services, or any combination thereof, it may reduce the time-period for tendering established in accordance with paragraph 3 to not less than 13 days, provided that it publishes by electronic means, at the same time, both the notice of intended procurement and the tender documentation. In addition, where the entity accepts tenders for commercial goods or services by electronic means, it may reduce the time-period established in accordance with paragraph 3 to not less than 10 days.
8. Where a procuring entity that is covered under Annex 13-B (Sub-Central Entities) or 13-C (Other Entities) has selected all or a limited number of qualified suppliers, as permitted by domestic legislation, the time-period for tendering may be fixed by mutual agreement between the procuring entity and the selected suppliers. In the absence of agreement, the period shall not be less than 10 days.
Article 13.12. Negotiations
1. A Party may provide for its procuring entities to conduct negotiations:
(a) where the entity has indicated its intent to conduct negotiations in the notice of intended procurement required under paragraph 2 of Article 13.7 (Notices); or
(b) where it appears from the evaluation that no tender is obviously the most advantageous in terms of the specific evaluation criteria set out in the notice of intended procurement or tender documentation.
2. A procuring entity shall:
(a) ensure that any elimination of suppliers participating in negotiations is carried out in accordance with the evaluation criteria set out in the notice of intended procurement or tender documentation; and
(b) where negotiations are concluded, provide a common deadline for the remaining participating suppliers to submit any new or revised tenders.
Article 13.13. Limited Tendering
1. Provided that it does not use this provision for the purpose of avoiding competition among suppliers or in a manner that discriminates against suppliers of the other Party or protects domestic suppliers, a procuring entity may use limited tendering and may choose not to apply Article 13.7 (Notices) to Article 13.9 (Qualification of Suppliers), paragraphs 7 to 11 of Article 13.10 (Technical Specifications and Tender Documentation), Article 13.11 (Time Periods), Article 13.12 (Negotiations), Article 13.14 (Electronic Auctions) and Article 13.15 (Treatment of Tenders and Awarding of Contracts) only under any of the following circumstances:
(a) where:
(i) no tenders were submitted or no suppliers requested participation;
(ii) no tenders that conform to the essential requirements of the tender documentation were submitted;
(iii) no suppliers satisfied the conditions for participation; or
(iv) the tenders submitted have been collusive,
provided that the requirements of the tender documentation are not substantially modified;
(b) where the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute goods or services exist for any of the following reasons:
(i) the requirement is for a work of art;
(ii) the protection of patents, copyrights or other exclusive rights; or
(iii) due to an absence of competition for technical reasons;
(c) for additional deliveries by the original supplier of goods or services that were not included in the initial procurement where a change of supplier for such additional goods or services:
(i) cannot be made for economic or technical reasons such as requirements of inter-changeability or interoperability with existing equipment, software, services or installations procured under the initial procurement; and
(ii) would cause significant inconvenience or substantial duplication of costs for the procuring entity;
(d) insofar as is strictly necessary where, for reasons of extreme urgency brought about by events unforeseeable by the procuring entity, the goods or services could not be obtained in time using open tendering or selective tendering;
(e) for goods purchased on a commodity market;
(f) where a procuring entity procures a prototype or a first good or service that is developed at its request in the course of, and for, a particular contract for research, experiment, study or original development. Original development of a first good or service may include limited production or supply in order to incorporate the results of field testing and to demonstrate that the good or service is suitable for production or supply in quantity to acceptable quality standards, but does not include quantity production or supply to establish commercial viability or to recover research and development costs;
(g) for purchases made under exceptionally advantageous conditions that only arise in the very short term in the case of unusual disposals such as those arising from liquidation, receivership or bankruptcy, but not for routine purchases from regular suppliers; or
(h) where a contract is awarded to a winner of a design contest provided that:
(i) the contest has been organised in a manner that is consistent with the principles of this Chapter, in particular relating to the publication of a notice of intended procurement; and
(ii) the participants are judged by an independent jury with a view to a design contract being awarded to a winner.
2. A procuring entity shall prepare a report in writing on each contract awarded under paragraph 1. The report shall include the name of the procuring entity, the value and kind of goods or services procured and a statement indicating the circumstances and conditions described in paragraph 1 that justified the use of limited tendering.
Article 13.14. Electronic Auctions
Where a procuring entity intends to conduct a covered procurement using an electronic auction, the entity shall provide each participant, before commencing the electronic auction, with:
(a) the automatic evaluation method, including the mathematical formula, that is based on the evaluation criteria set out in the tender documentation and that will be used in the automatic ranking or re-ranking during the auction;
(b) the results of any initial evaluation of the elements of its tender where the contract is to be awarded on the basis of the most advantageous tender; and
(c) any other relevant information relating to the conduct of the auction.
Article 13.15. Treatment of Tenders and Awarding of Contracts
Treatment of Tenders
1. A procuring entity shall receive, open and treat all tenders in accordance with procedures that guarantee the fairness and impartiality of the procurement process, and the confidentiality of tenders.
2. A procuring entity shall not penalise any supplier whose tender is received after the time specified for receiving tenders if the delay is due solely to mishandling on the part of the procuring entity.
3. Where allowed by a Party, its procuring entity may provide a supplier with an opportunity to correct unintentional errors of form between the opening of tenders and the awarding of the contract on the condition that the procuring entity provide the same opportunity to all participating suppliers.
Awarding of Contracts
4. To be considered for an award, a tender shall be submitted in writing and shall, at the time of opening, comply with the essential requirements set out in the notices and tender documentation and be from a supplier that satisfies the conditions for participation.
5. Unless a procuring entity determines that it is not in the public interest to award a contract, the entity shall award the contract to the supplier that the entity has determined to be capable of fulfilling the terms of the contract and that, based solely on the evaluation criteria specified in the notices and tender documentation, has submitted:
(a) the most advantageous tender in terms of price and non-price criteria; or
(b) where price is the sole criterion, the lowest price.
6. Where a procuring entity receives a tender with a price that is abnormally lower than the prices in other tenders submitted or the estimated procurement value, it may verify with the supplier that it satisfies the conditions for participation and is capable of fulfilling the terms of the contract.
7. A procuring entity shall not use options, cancel a procurement or modify awarded contracts in a manner that circumvents the obligations under this Chapter.
Article 13.16. Transparency of Procurement Information
Information Provided to Suppliers
1. A procuring entity shall promptly inform participating suppliers of the entity’s contract award decisions and, on the request of a supplier, shall do so in writing. Subject to paragraphs 2 and 3 of Article 13.17 (Disclosure of Information), a procuring entity shall, on request, provide an unsuccessful supplier with an explanation of the reasons why the entity did not select its tender and the relative advantages of the successful supplier’s tender.
Publication of Award Information
2. Not later than 72 days after the award of each contract covered by this Chapter, a procuring entity shall publish a notice in the appropriate paper or electronic medium listed in Annex 13-H (Means of Publication). Where the entity publishes the notice only in an electronic medium, the information shall remain readily accessible for a reasonable period of time. The notice shall include at least the following information:
(a) a description of the goods or services procured;
(b) the name and address of the procuring entity;
(c) the name and address of the successful supplier;
(d) the value of the successful tender or the highest and lowest offers taken into account in the award of the contract;
(e) the date of award; and
(f) the type of procurement method used, and in cases where limited tendering was used in accordance with Article 13.13 (Limited Tendering), a description of the circumstances justifying the use of limited tendering.
Maintenance of Documentation, Reports and Electronic Traceability
3. Each procuring entity shall, for a period of at least three years from the date it awards a contract, maintain:
(a) the documentation and reports of tendering procedures and contract awards relating to covered procurement, including the reports required under Article 13.13 (Limited Tendering); and
(b) data that ensure the appropriate traceability of the conduct of covered procurement by electronic means.
Collection and Reporting of Statistics
4. Each Party agrees to communicate to the other Party the available and comparable statistics relevant to the procurement covered by this Chapter.
Article 13.17. Disclosure of Information
Provision of Information to Parties
1. On request of a Party, the other Party shall provide promptly any information necessary to determine whether a procurement was conducted fairly, impartially and in accordance with this Chapter, including information on the characteristics and relative advantages of the successful tender. In cases where release of the information would prejudice competition in future tenders, the Party that receives the information shall not disclose it to any supplier, except after consulting with, and obtaining the agreement of, the Party that provided the information.
Non-Disclosure of Information
2. Notwithstanding any other provision of this Chapter, a Party, including its procuring entities, shall not provide to any particular supplier information that might prejudice fair competition between suppliers.
3. Nothing in this Chapter shall be construed to require a Party, including its procuring entities, authorities and review bodies, to disclose confidential information where disclosure:
(a) would impede law enforcement;
(b) might prejudice fair competition between suppliers;
(c) would prejudice the legitimate commercial interests of particular persons, including the protection of intellectual property; or
(d) would otherwise be contrary to the public interest.
Article 13.18. Domestic Review Procedures
1. In the event of a complaint by a supplier of a Party that there has been a breach of this Chapter in the context of procurement by the other Party, that Party may encourage the supplier to first seek resolution of its complaint in consultation with the procuring entity of the other Party.
2. Each Party shall provide suppliers of the other Party with non-discriminatory, timely, transparent and effective procedures to challenge alleged breaches of this Chapter arising in the context of procurements in which they have, or have had, an interest.
3. Each Party shall provide its challenge procedures in writing and make them generally available.
4. Challenges shall be heard by a court or by an impartial and independent review body with no interest in the outcome of the procurement and the members of which are secure from external influence during the term of appointment.
5. Each supplier shall be allowed a sufficient period of time to prepare and submit a challenge, which in no case shall be less than 10 days from the time when the basis of the challenge became known or reasonably should have become known to the supplier.
6. Each Party shall adopt or maintain procedures that provide for rapid interim measures to preserve the supplier’s opportunity to participate in the procurement. Such interim measures may result in suspension of the procurement process. The procedures may provide that overriding adverse consequences for the interests concerned, including the public interest, may be taken into account when deciding whether such measures should be applied. Just cause for not acting shall be provided in writing.
7. A Party’s total liability for any breach of this Chapter or compensation for loss or damages suffered shall be limited to the costs for tender preparation reasonably incurred by the supplier for the purpose of the procurement.
Article 13.19. Modifications and Rectifications to Coverage
Notification of Proposed Modification
1. A Party shall notify the other Party of any proposed rectification, transfer of an entity from one Annex to another, withdrawal of an entity or other modification of its Annexes (any of which is hereinafter referred to as “modification”) in writing.
2. For any proposed withdrawal of an entity from any Party’s Annexes on the grounds that government control or influence over the entity's covered procurement has been effectively eliminated, the Party proposing the modification (hereinafter referred to as “modifying Party”) shall include in the notification evidence that such government control or influence has been effectively eliminated. Government control or influence over the covered procurement of entities listed in its Annexes is deemed to be effectively eliminated if the procuring entity has been privatised or where the majority of shares of the entity is not held by government or other public bodies.
3. Where government control or influence over the covered procurement of an entity of a Party has been effectively eliminated, the other Party shall not be entitled to compensatory adjustments.
4. For any other proposed modification, the modifying Party shall include in the notification information as to the likely consequences of the change for the coverage provided in this Chapter. Where the modifying Party proposes to make minor amendments or technical rectifications of a purely formal nature not affecting covered procurement, it shall notify these modifications at least every two years.
Resolution of Objection
5. In case of objection by the other Party (hereinafter referred to as “objecting Party”) to the notification by the modifying Party, the Parties shall seek to resolve the objection through bilateral consultations. In such consultations, the Parties shall consider:
(a) evidence pertaining to the effective elimination of government control or influence over an entity’s covered procurement in the case of a notification under paragraph 2;
(b) evidence that the proposed modification does not affect coverage in the case of a notification under paragraph 4; and
(c) any claims relating to the need for or level of compensatory adjustments, arising from modifications notified according to paragraph 1. The adjustments may consist of either compensatory expansion of coverage by the modifying Party or a withdrawal of equivalent coverage by the objecting Party, with a view to maintaining a balance of rights and obligations and a comparable level of mutually agreed coverage provided in this Chapter.